KIP 7570 Service Manual and Parts Catalog


Accurate and concise text, combined with detailed illustrations, lists of error code, instruction and diagrams, guide you through procedure of repair, remediate, maintenance and adjustments your copier, printer or scanner.
Present service manual and parts catalog KIP 7570 contain clear instructions and procedures on how to fix the problems occurring in your equipment.
The information contained in this repair manual is necessary for the repair, but also prevention, resulting in a longer life of your equipment.
Format of the manual: PDF, makes it easy to navigate, instant download and print. English language.
To see what contain, please read table of contents:

Chapter 1. INTRODUCTION
1. 1 Features
1. 2 Specifications
1. 2. 1 General
1. 2. 2 Printer part
1. 2. 3 Scanner part
1. 3 Appearance
1. 3. 1 Front view
1. 3. 2 Rear view
1. 4 Specifications for Scan Original (for MFP Model)
1. 4. 1 Original – Standard
1. 4. 2 Special Documents
1. 4. 3 “Do Not Scan” Originals
1. 5 Specifications for Printing Media
1. 5. 1 Papers not available to use
1. 5. 2 Keeping the paper in the custody
1. 5. 3 Treatment against environmental condition

Chapter 2. INSTALLATION
Installation place and procedure/Unpacking

Chapter 3. PRINT/SCAN PROCESS
3. 1 Print Process
3. 1. 1 Characteristic of toner
3. 1. 2 Each step of the print process
3. 1. 2. 1 Erasing (Removal of negative electric charges)
3. 1. 2. 2 Charge of Drum
3. 1. 2. 3 Exposure
3. 1. 2. 4 Development
3. 1. 2. 5 Transfer
3. 1. 2. 6 Separation
3. 1. 2. 7 Drum Cleaning (Removal of remained toner)
3. 1. 2. 8 Fusing
3. 1. 3 Controlling the movement of toner in the Developer Unit
3. 1. 4 Toner Collection Process
3. 1. 5 Density Compensation Process
3. 2 Scan Process (for MFP Model)
3. 2. 1 Data flow in scan and copy
3. 2. 2 Positioning process of Image Block

Chapter 4. ELECTRICAL
4. 1 General Information
4. 2 Electrical Components Location
4. 2. 1 Right side
4. 2. 2 Left side
4. 2. 3 Back side
4. 2. 4 LED Head Frame
4. 2. 5 Main Frame
4. 2. 6 Developer Unit
4. 2. 7 Fuser Unit
4. 2. 8 Roll Deck
4. 2. 9 Cutter Unit
4. 2.10 Inner Transport Unit
4. 2.11 Scanner Unit (for MFP Model)
4. 3 Check & Adjustment of Analog Output from HV Power Supply
4. 3. 1 Situations necessary to check the analog output
4. 3. 2 Analog Voltage to Image Corona
4. 3. 3 Analog Voltage to Transfer Corona
4. 3. 4 AC Component to Separation Corona
4. 3. 5 DC Component to Separation Corona
4. 3. 6 Negative Developer Bias to Developer Roller
4. 3. 7 Positive Developer Bias to Developer Roller
4. 3. 8 Bias gap between Developer Roller and Regulation Roller
4. 3. 9 Positive Cleaning Roller Bias (Print Cycle)
4. 3. 10 Negative Cleaning Roller Bias (Toner Collection Process)

Chapter 5. MECHANICAL
5. 1 Outer Covers
5. 1. 1 Removal of Side Covers
5. 1. 2 Removal of Cover
5. 1. 3 Removal of Top Cover
5. 2 Developer Unit
5. 2. 1 Removal of the Developer Unit
5. 2. 2 Replacement of Recommended Periodic Replacement Parts
5. 2. 3 Replacement of Roller Supply
5. 2. 4 Replacement of Screw Assy
5. 2. 5 Replacement of DC Motor
5. 2. 6 Replacement of Sensor (TLS1)
5. 2. 7 Replacement of KNC PCB
5. 2. 8 Adjustment of the space between gears (Necessary to adjust after replacing the Developer Unit)
5. 2. 9 Readjustment of the pressure of Regulation Roller
5. 3 Fuser Unit
5. 3. 1 Removal of Fuser Unit
5. 3. 2 Reinstallation of Fuser Unit
5. 3. 3 Replacement of Recommended Periodic Replacement Parts
5. 3. 4 Replacement of Roller Pressure
5. 3. 5 Fuser Pressure Adjustment (NIP width check)
5. 3. 6 Replacement of Thermistor (TH1, TH2)
5. 3. 7 Replacement of Thermostat (TS1, TS2)
5. 3. 8 Replacement of Exit Sensor (PH3)
5. 4 Roll Deck
5. 4. 1 Replacement of Cutter Assembly
5. 4. 2 Replacement of Clutches (CL3, CL4, CL5) of Roll 1
5. 4. 3 Replacement of Clutches (CL6, CL7) of Roll 2 5-132
5. 4. 4 Replacement of Timing Belt 633
5. 4. 5 Replacement of Timing Belt 453
5. 4. 6 Replacement of Timing Belt 330
5. 4. 7 Replacement of Sensors (PH6, PH7, PH9, PH12)
5. 4. 8 Replacement of Sensors (PH8)
5. 4. 9 Replacement of Sensors (PH10)
5. 4.10 Replacement of Dehumidify Heater (Roll 1)
5. 4.11 Replacement of Dehumidify Heater (Roll 2)
5. 5 Photoconductive Drum
5. 5. 1 Replacement of the Photoconductive Drum
5. 5. 2 How to fix the Aluminum Blocks
5. 5. 2. 1 Fixing Block with Drum Block Fix Tool
5. 5. 2. 2 Fixing Block by hand (w/o Drum Block Fix Tool)
5. 5. 3 Cleaning of Photoconductive Drum
5. 5. 4 Replacement of Belt 4

Chapter 6. MAINTENANCE
6. 1 Recommended Periodic Replacement Parts
6. 2 Maintenance
6. 2. 1 List of periodic maintenance items & maintenance intervals
6. 2. 2 List of “as required” basis maintenance items
6. 2. 3 Maintenance operations
6. 2. 3. 1 Cleaning of scanner (Scan Glass, Rollers, Guide Plate & Sensors)
6. 2. 3. 2 Cleaning of UI Assy (Touch Panel)
6. 2. 3. 3 Lubrication of driving gears on machine frame
6. 2. 3. 4 Lubrication of HV copper plates in developer unit
6. 2. 3. 5 Lubrication of HV copper plates on machine frame
6. 3 Service Kit
6. 4 Service Tool List
6. 5 Disposal of machine

Chapter 7. TROUBLESHOOTING
7. 1 Troubleshooting – Printer Errors
7. 1. 1 Countermeasures – Operator Call Errors
7. 1. 1. 1 Manual (By-Pass Paper) feed “Delay”
7. 1. 1. 2 Roll 1/2 Set Sensor “Delay”
7. 1. 1. 3 Feed (R-EDGE) Sensor “Delay”, “Early”
7. 1. 1. 4 Registration Sensor “Delay”, “Stay”, “Early”, “Remained”
7. 1. 1. 5 Separation Sensor “Delay”, “Stay”, “Early”, “Remained”
7. 1. 1. 6 Fuser Exit Sensor “Delay”, “Stay”, “Early”, “Remained”
7. 1. 1. 7 Exit Encoder (STACKJ_S) Sensor Jam
7. 1. 1. 8 Optional Device Jam “Delay”, “Stay”
7. 1. 1. 9 Deck Open
7. 1. 1.10 Deck Jam
7. 1. 1.11 Manual Set NG
7. 1. 1.12 Toner Empty
7. 1. 1.13 The door opened during the print
7. 1. 1.14 Stacker Communication Error
7. 1. 1.15 Abnormal variation in cut length
7. 1. 1.16 Output tray full
7. 1. 2 Countermeasures – Service Call Errors
7. 1. 2. 1 Cutter Error (E-0101h/E-257)
7. 1. 2. 2 Process 1 Developer Set Motor Error (E-0301h/E-769)
7. 1. 2. 3 Process 1 Developer Drum Motor Error (E-0302h/E-770)
7. 1. 2. 4 Out of Process 1 Developer Error (E-0310h/E-784)
7. 1. 2. 5 Abnormal output of Process 1 1st Charger (E-0320h/E-800)
Abnormal output of Process 1 Transfer Charger (E-0321h/E-801)
Abnormal output of Process 1 Separation Charger (E-0322h/E-802)
7. 1. 2. 6 Abnormal output of Process 1 Developer Bias (E-0323h/E-803)
7. 1. 2. 7 Process 1 LED Printhead 1 Error (E-0330h/E-816)
Process 1 LED Printhead 2 Error (E-0331h/E-817)
Process 1 LED Printhead 3 Error (E-0332h/E-818)
7. 1. 2. 8 Process 1 Density Sensor Error (E-0335h/E-821)
7. 1. 2. 9 Process 1 Density Compensation Error (E-0336h/E-822)
7. 1. 2.10 Counter-A Error (E-0800h/E-2048)
7. 1. 2.11 Fuser Low-Temp Error (E-0900h/E-2304)
Fuser Thermostat Error (E-0903hE-2307)
7. 1. 2.12 Fuser Over-Temp Error (E-0901h/E-2305)
7. 1. 2.13 Fuser Motor Error (E-0920h/E-2336)
7. 1. 2.14 Backup Data Write Error (E-0A00h/E-2560)
7. 1. 2.15 Main Board Error (E-0A20h/E-2592)
7. 1. 2.16 KNC1 Error (E-0A41h/E-2625)
7. 2 Troubleshooting – Image Quality Defects
7. 2. 1 Basic Image Adjustment
7. 2. 2 Countermeasures – Image Quality Defects
7. 2. 2. 1 Halftone is too light
7. 2. 2. 2 Halftone and solid black are too light
7. 2. 2. 3 The whole image is extremely light
7. 2. 2. 4 Density is uneven
7. 2. 2. 5 Totally appeared foggy image
7. 2. 2. 6 Foggy image or blurred black wide line (vertical)
7. 2. 2. 7 Clear black thin line (vertical)
7. 2. 2. 8 White line (Vertical)
7. 2. 2. 9 Void of image
7. 2. 2.10 Dirt on the back of the print
7. 2. 2.11 Defective fusing
7. 2. 2.12 Defective image placement, No Leading Edge
7. 2. 2.13 Jitter
7. 2. 2.14 Image looks not sharp
7. 2. 2.15 Uneven image density (vertical)
7. 2. 2.16 Completely white (No image)
7. 2. 2.17 Completely black
7. 2. 2.18 Crease of paper
7. 2. 2.19 Double image
7. 2. 2.20 Dirt on the print (Offset)
7. 2. 2.21 Image Void on Long Print without Crease
7. 2. 2.22 Crease on Long Print (and image void at a time)
7. 3 Troubleshooting – Scanner Defects
7. 3. 1 Countermeasures – scanner operation
7. 3. 1. 1 Original can not be set (Old Scanner) (Scanner does not transport)
7. 3. 1. 2 Scanner does not start scanning from the original set position
7. 3. 1. 3 Original can not be set (Original feeding does not stop)
7. 3. 1. 4 Original is mis-fed
7. 3. 1. 5 Motor rotates endlessly at the time of turning on
7. 3. 1. 6 Scanner is not recognized
7. 3. 1. 7 Check of Size Sensors
7. 3. 1. 8 Check of Document Sensor Front
7. 3. 1. 9 Check of Document Sensor Rear
7. 3. 2 Countermeasures – scanner image quality
7. 3. 2. 1 Completely black
7. 3. 2. 2 Vertical black lines
7. 3. 2. 3 Vertical white lines
7. 3. 2. 4 Some image is lost at the boundary of Image Blocks
7. 3. 2. 5 Vertical image gap between Image Blocks
7. 3. 2. 6 Image quality is not good
7. 3. 2. 7 Density is different between left and right
7. 3. 2. 8 Difference of image density between image blocks
7. 4 Touch Screen Calibration
7. 5 Internal Counter Error

Chapter 8. MAINTENANCE GUI
8. 1 Maintenance GUI Overview
8. 1. 1 Launching Maintenance GUI
8. 1. 2 Closing Maintenance GUI
8. 1. 3 Update of Maintenance GUI
8. 2 Image Print
8. 2. 1 Operation procedure of test printing
8. 3 Pattern Print
8. 3. 1 Operation procedure of test printing
8. 4 Backup Data
8. 4. 1 Operations in Backup Data
8. 4. 1. 1 Change and save of the setting values
8. 4. 1. 2 Saving all parameter values into a zip file for backing up (Export)
8. 4. 1. 3 Loading the backed up zip file to printer (Import)
8. 4. 2 Setting Item List
8. 4. 3 Setting Item Explanation
8. 4. 3. 1 Leading Registration (No. 000 & 001)
8. 4. 3. 2 Trailing Margin (No. 002 & 003)
8. 4. 3. 3 Side Margin (Left & Right) (No. 004)
8. 4. 3. 4 Side Registration (Cut sheet, Roll 1, Roll 2) (No. 005 to 007)
8. 4. 3. 5 Vertical Alignment of Pixels between Image Blocks (No.014 & 015)
8. 4. 3. 6 Cut Length 1 (8.5-inch) / Cut Length 2 (48-inch) (No.016 & 017)
8. 4. 3. 7 Reserved
8. 4. 3. 8 Leading Margin (No. 019)
8. 4. 3. 9 Cut Length 4 (Individual Compensation for Roll 2) (No.020)
8. 4. 3.10 Developer Bias (No.022 to 027)
8. 4. 3.11 Developer Bias compensation – 1st Drum revolution (No.028)
8. 4. 3.12 Transfer Voltage (No.029 to 034)
8. 4. 3.13 Separation Corona ON Timing (No.035)
8. 4. 3.14 Transfer Corona ON Timing (No.037)
8. 4. 3.15 Transfer Corona OFF Timing (No.038)
8. 4. 3.16 Print – Fuser Temperature Center (No.039 to 044)
8. 4. 3.17 Fuser Temperature to start idling (No.045)
8. 4. 3.18 Warm Sleep – Fuser Temperature (No.046)
8. 4. 3.19 Fuser Temperature Control Range (No.048 & 049)
8. 4. 3.20 Reaction Time of Toner Supply Motor (No.050)
8. 4. 3.21 Toner Supply Motor ON Time (No.051)
8. 4. 3.22 Dot Enhancement Level (Dither) (No.052)
8. 4. 3.23 Feed Clutch OFF time for Roll 1/2 long print (No.053, 054)
8. 4. 3.24 Metric or Inch (No.055)
8. 4. 3.25 Language (No.056)
8. 4. 3.26 Interface Communication Setting (No.057)
8. 4. 3.27 Recognition of Roll Deck 2 (No.058)
8. 4. 3.28 Counter Unit (No.059)
8. 4. 3.29 Maximum print length (No.060)
8. 4. 3.30 Stacking Device setting (No.061)
8. 4. 3.31 Enable/disable Down Sequence (No.062)
8. 4. 3.32 Cut Length 5 & 6 (Length Compensation for Tracing Paper / Film) (No.063, 064)
8. 4. 3.33 Drum Reverse Time (No.065)
8. 4. 3.34 Fuser Motor Reverse Setting (No.066)
8. 4. 3.35 Operation of Separation Lamp (No.067)
8. 4. 3.36 Compensation of Fuser Motor Speed for roll paper (Plain paper / A3, 12” & 11”) (No.070 to 075, 678, 679, No.831 to 836, No.861 to 86 6)
8. 4. 3.37 Compensation of Fuser Motor Speed for roll paper (Tracing paper / A3, 12” & 11”) (No.076 to 081, 680, 681)
8. 4. 3.38 Compensation of Fuser Motor Speed for roll paper (Film / A3, 12” & 11”) (No.082 to 087, 682, 683)
8. 4. 3.39 Compensation of Fuser Motor Speed for roll paper (Special plain paper / A3, 12” & 11”) (No.088 to 093, 684, 685)
8. 4. 3.40 Compensation of Fuser Motor Speed for roll paper (Special tracing paper / A3, 12” & 11”) (No.094 to 099)
8. 4. 3.41 Compensation of Fuser Motor Speed for roll paper (Special film / A3, 12” & 11”) (No.100 to 105, 688, 689)
8. 4. 3.42 Compensation of Fuser Motor Speed for roll paper (Plain paper / A2, 18” & 17”) (No.106 to 111, 690, 691, No.837 to 842, No.867 to 87 2)
8. 4. 3.43 Compensation of Fuser Motor Speed for roll paper (Tracing paper / A2, 18” & 17”) (No.112 to 117, 692, 693)
8. 4. 3.44 Compensation of Fuser Motor Speed for roll paper (Film / A2, 18” & 17”) (No.118 to 123, 694, 695)
8. 4. 3.45 Compensation of Fuser Motor Speed for roll paper (Special plain paper / A2, 18” & 17”) (No.124 to 129, 696, 697)
8. 4. 3.46 Compensation of Fuser Motor Speed for roll paper (Special tracing paper / A2, 18” & 17”) (No.130 to 135, 698, 699)
8. 4. 3.47 Compensation of Fuser Motor Speed for roll paper (Special film / A2, 18” & 17”) (No.136 to 141, 700, 701)
8. 4. 3.48 Compensation of Fuser Motor Speed for roll paper (Plain paper / A1, 24” & 22”) (No.142 to 147, 702, 703, No.843 to 848, No.873 to 87 8)
8. 4. 3.49 Compensation of Fuser Motor Speed for roll paper (Tracing paper / A1, 24” & 22”) (No.148 to 153, 704, 705)
8. 4. 3.50 Compensation of Fuser Motor Speed for roll paper (Film / A1, 24” & 22”) (No.154 to 159, 706, 707)
8. 4. 3.51 Compensation of Fuser Motor Speed for roll paper (Special plain paper / A1, 24 & 22”) (No.160 to 165, 708, 709)
8. 4. 3.52 Compensation of Fuser Motor Speed for roll paper (Special tracing paper / A1, 24” & 22”) (No.166 to 171, 710, 711)
8. 4. 3.53 Compensation of Fuser Motor Speed for roll paper (Special film / A1, 24” & 22”) (No.172 to 177, 712, 713)
8. 4. 3.54 Compensation of Fuser Motor Speed for roll paper (Plain paper / A0, 36” & 34”) (No.178 to 183, 714, 715, No.849 to 854, No.879 to 88 4)
8. 4. 3.55 Compensation of Fuser Motor Speed for roll paper (Tracing paper / A0, 36” & 34”) (No.184 to 189, 716, 717)
8. 4. 3.56 Compensation of Fuser Motor Speed for roll paper (Film / A0, 36” & 34”) (No.190 to 195, 718, 719)
8. 4. 3.57 Compensation of Fuser Motor Speed for roll paper (Special plain paper / A0, 36 & 34”) (No.196 to 201, 720, 721)
8. 4. 3.58 Compensation of Fuser Motor Speed for roll paper (Special tracing paper / A0, 36” & 34”) (No.202 to 207, 722, 723)
8. 4. 3.59 Compensation of Fuser Motor Speed for roll paper (Special film / A0, 36” & 34”) (No.208 to 213, 724, 725)
8. 4. 3.60 Main Motor Speed (No.310 to 315)
8. 4. 3.61 Fuser Motor Speed (36” / 34” / 30” / 24” / 22” / A0 / B1 / A1) (No.316 to 321)
8. 4. 3.62 Separation Corona OFF Timing (No.322 to 327)
8. 4. 3.63 Compensation of Fuser Motor Speed for cut sheet paper (Plain paper / A3, A2, 12”, 11”, 18” & 17”) (No.328 to 333)
8. 4. 3.64 Compensation of Fuser Motor Speed for cut sheet paper (Tracing paper / A3, A2, 12”, 11”, 18” & 17”) (No.334 to 339)
8. 4. 3.65 Compensation of Fuser Motor Speed for cut sheet paper (Film / A3, A2, 12”, 11”, 18” & 17”) (No.340 to 345)
8. 4. 3.66 Compensation of Fuser Motor Speed for cut sheet paper (Special plain paper / A3, A2, 12”, 11”, 18” & 17”) (No.346 to 351)
8. 4. 3.67 Compensation of Fuser Motor Speed for cut sheet paper (Special tracing paper / A3, A2, 12”, 11”, 18” & 17”) (No.352 to 357)
8. 4. 3.68 Compensation of Fuser Motor Speed for cut sheet paper (Special film / A3, A2, 12”, 11”, 18” & 17”) (No.358 to 363)
8. 4. 3.69 Compensation of Fuser Motor Speed for cut sheet paper (Plain paper / A1, 24” & 22”) (No.364 to 369)
8. 4. 3.70 Compensation of Fuser Motor Speed for cut sheet paper (Tracing paper / A1, 24” & 22”) (No.370 to 375)
8. 4. 3.71 Compensation of Fuser Motor Speed for cut sheet paper (Film / A1, 24” & 22”) (No.376 to 381)
8. 4. 3.72 Compensation of Fuser Motor Speed for cut sheet paper (Special plain paper / A1, 24” & 22”) (No.382 to 387)
8. 4. 3.73 Compensation of Fuser Motor Speed for cut sheet paper (Special tracing paper / A1, 24” & 22”) (No.388 to 393)
8. 4. 3.74 Compensation of Fuser Motor Speed for cut sheet paper (Special film / A1, 24” & 22”) (No.394 to 399)
8. 4. 3.75 Compensation of Fuser Motor Speed for cut sheet paper (Plain paper / A0, 36” & 34”) (No.400 to 405)
8. 4. 3.76 Compensation of Fuser Motor Speed for cut sheet paper (Tracing paper / A0, 36” & 34”) (No.406 to 411)
8. 4. 3.77 Compensation of Fuser Motor Speed for cut sheet paper (Film / A0, 36” & 34”) (No.412 to 417)
8. 4. 3.78 Compensation of Fuser Motor Speed for cut sheet paper (Special plain paper / A0, 36 & 34”) (No.418 to 423)
8. 4. 3.79 Compensation of Fuser Motor Speed for cut sheet paper (Special tracing paper / A0, 36” & 34”) (No.424 to 429)
8. 4. 3.80 Compensation of Fuser Motor Speed for cut sheet paper (Special film / A0, 36” & 34”) (No.430 to 435)
8. 4. 3.81 Compensation of Fuser Motor Speed for roll paper (Plain paper / B1, 30”) (No.436 to 441, 726, 727, No.855 to 860, No.885 to 89 0)
8. 4. 3.82 Compensation of Fuser Motor Speed for roll paper (Tracing paper / B1, 30”) (No.442 to 447, 728, 729)
8. 4. 3.83 Compensation of Fuser Motor Speed for roll paper (Film / B1, 30”) (No.448 to 453, 730, 731)
8. 4. 3.84 Compensation of Fuser Motor Speed for roll paper (Special plain paper / B1, 30”) (No.454 to 459, 732, 733)
8. 4. 3.85 Compensation of Fuser Motor Speed for roll paper (Special tracing paper / B1, 30”) (No.460 to 465, 734, 735)
8. 4. 3.86 Compensation of Fuser Motor Speed for roll paper (Special film / B1, 30”) (No.466 to 471, 736, 737)
8. 4. 3.87 Compensation of Fuser Motor Speed for cut sheet paper (Plain paper / B1, 30”) (No.472 to 477)
8. 4. 3.88 Compensation of Fuser Motor Speed for cut sheet paper (Tracing paper / B1, 30”) (No.478 to 483)
8. 4. 3.89 Compensation of Fuser Motor Speed for cut sheet paper (Film / B1, 30”) (No.484 to 489)
8. 4. 3.90 Compensation of Fuser Motor Speed for cut sheet paper (Special plain paper / B1, 30”) (No.490 to 495)
8. 4. 3.91 Compensation of Fuser Motor Speed for cut sheet paper (Special tracing paper / B1, 30”) (No.496 to 501)
8. 4. 3.92 Compensation of Fuser Motor Speed for cut sheet paper (Special film / B1, 30”) (No.502 to 507)
8. 4. 3.93 Transfer Voltage applied at 100mm from trailing edge (Plain paper / Tracing paper / Film) (No.508 to 510)
8. 4. 3.94 Transfer Voltage applied at 70mm from trailing edge (Plain paper / Tracing paper / Film) (No.511 to 513)
8. 4. 3.95 Fuser Motor Speed applied at 30mm from trailing edge (Plain paper / Tracing paper / Film) (No.514 to 516)
8. 4. 3.96 Judgment value for Additional Cut Length for Non-standard Size Prints (No.613 to 616)
8. 4. 3.97 Additional Cut Length for Non-standard Size Prints (No.617 to 620)
8. 4. 3.98 Toner Supply Roller Bias (No.621)
8. 4. 3.99 Regulation Bias (No.622)
8. 4. 3.100 Density Sensor Standard Output (No.623)
8. 4. 3.101 Density Sensor Analog Voltage (No.624)
8. 4. 3.102 Print – Fuser Temperature Side (12”/11”/A3) (No.625 to 630)
8. 4. 3.103 Print – Fuser Temperature Side (18”/17”/15”/A2) (No.631 to 636)
8. 4. 3.104 Print – Fuser Temperature Side (24”/22”/A1) (No.637 to 642)
8. 4. 3.105 Print – Fuser Temperature Side (36”/34”/30”/A0/B1) (No.643 to 648)
8. 4. 3.106 Density Sensor Output Monitor (No.649)
8. 4. 3.107 Regulation Bias Increment for Auto Adjustment Level 2 & 3 (No.650)
8. 4. 3.108 Total Increment of Regulation Bias Adjustment (No.651)
8. 4. 3.109 Density Compensation ON/OFF (No.652)
8. 4. 3.110 Target Density (No.653)
8. 4. 3.111 Regulation Bias Maximum (No.654)
8. 4. 3.112 Density Measure Interval (No.655, 656)
8. 4. 3.113 Developer Bias Increment for Auto Adjustment Level 1 & after (No.657)
8. 4. 3.114 Ready – Fuser Temperature Center (No.660 to 665)
8. 4. 3.115 Ready – Fuser Temperature Side (No.666 to 671)
8. 4. 3.116 Fuser Motor Speed (18” / 17” / 15” / 12” / 11” / A2 / A3) (No. 672 to 677)
8. 4. 3.117 Compensation of Fuser Motor Speed 4 (No.678 to 737)
8. 4. 3.118 Standby – Fuser Temperature (No.738, 739)
8. 4. 3.119 Assist Fan Off Timing (No.740 to 742)
8. 4. 3.120 Fuser Motor Speed applied at 100mm from trailing edge (36” / 34” / 30” / A0 / B1 width) (No.743 to 745)
8. 4. 3.121 Tracing Mode (No. 749)
8. 4. 3.122 Disable HV Error Detection Mode (No. 751)
8. 4. 3.123 Definition of long print (used for Auto Initial Cut after Long Print) (No. 753)
8. 4. 3.124 Trigger of Auto Initial Cut after Long Print (Number of long prints) (No.754)
8. 4. 3.125 Length of trim cut for Auto Initial Cut before Print (No. 755)
8. 4. 3.126 Side Registration (Roll 3, Roll 4) (No. 756 to 757)
8. 4. 3.127 Number of prints available for stacking on Upper Print Tray (No. 759 to 761)
8. 4. 3.128 Length of trim cut for Auto Initial Cut after Long Print (No.765)
8. 4. 3.129 Horizontal Alignment of LED Head block A & B (No. 767)
8. 4. 3.130 Horizontal Alignment of LED Head block B & C (No. 768)
8. 4. 3.131 Darkness of LED Head Block A (No. 769)
8. 4. 3.132 Darkness of LED Head Block B (No. 770)
8. 4. 3.133 Darkness of LED Head Block C (No. 771)
8. 4. 3.134 Darkness of LED Head (all 3 blocks) (No. 772)
8. 4. 3.135 Parameters of Image Enhancement Level 0 (No. 773 to 782)
8. 4. 3.136 Parameters of Image Enhancement Level 1 (No. 783 to 792)
8. 4. 3.137 Parameters of Image Enhancement Level 2 (No. 793 to 802)
8. 4. 3.138 Parameters of Image Enhancement Level 3 (No. 803~812)
8. 4. 3.139 Reserved
8. 4. 3.140 Darkness adjustment for the boundary between blocks A & B (No. 814)
8. 4. 3.141 Darkness adjustment for the boundary between blocks B & C (No. 815)
8. 4. 3.142 Selection of roll deck to perform “Auto Initial Cut before Print” (No.816)
8. 4. 3.143 Timer of “Auto Initial Cut before Print” (No.817)
8. 4. 3.144 Regional setting (No.818)
8. 4. 3.145 Detection Time of Fuser Temperature Heat-up Error (No.819 to 8-186271 )
8. 4. 3.146 Running setting (No.822)
8. 4. 3.147 Feed Clutch OFF time for Roll 3/4 long print (No.823, 824)
8. 4. 3.148 Additive temperature for the fuser temperature control (when starting at the low temperature) (No. 825)
8. 4. 3.149 Fuser Roller Rotation (when starting at the low temperature) (No. 826)
8. 4. 3.150 Cut Length 7/8 (Individual Compensation for Roll 3, Roll 4) (No.891, 892)
8. 4. 3.152 Print – Fuser Temperature Side (30”/B1) (No.893 to 898)
8. 5 Information
8. 5. 1 Operation in Information
8. 5. 2 List of Analog Data Monitor
8. 6 Input Check
8. 6. 1 Operation in Input Check
8. 6. 2 Input / Output Signal list
8. 7 Output Check
8. 7. 1 Operation in Output Check
8. 7. 2 Output Signal List
8. 8 History
8. 8. 1 Operation in History
8. 9 Mask
8. 9. 1 Mask List
8. 9. 2 Operation in Error Mask
8. 9. 3 Operation in Jam Mask
8.10 Factory Adjustment
8.11 Clear/Reset
8.11. 1 Operation in Clear/Reset
8.11. 2 Changing Counter Value
8.11. 3 Reset of Bias Adjustment by Density Compensation Process
8.12 Program Update
8.12. 1 Operation in Program Update
8.13 Version Info
8.13. 1 Indication in Version Info
8.14 Deck Information
8.14. 1 Operation in Deck Information
8.15 Density & Toner Supply
8.15. 1 Operation in Density & Toner Supply
8.16 Printer Function (Wrench Icon)
8.16. 1 Operation in Printer Function
8.17 Counter Information
8.17. 1 Operation in Counter Information
8.18 Regional Setting
8.19 Communication Reset
8.20 Active Modes
8.21 USB Eject

Chapter 9. SCANNER UTILITY
9. 1 K129 Diag Overview
9. 2 Starting K129 Diag
9. 3 Version
9. 4 Backup Data
9. 4. 1 Changing Backup Data
9. 4. 2 Saving the Current Backup Data
9. 4. 3 Editing Backup Data File
9. 4. 4 Restoring Backup Data
9. 4. 5 Backup Data List
9. 4. 6 BUD Descriptions
9. 4. 7 Saving Shading Data
9. 4. 8 Restoring Shading Data
9. 5 Update
9. 5. 1 Sending Firmware to Scanner
9. 6 Motion
9. 6. 1 Shading
9. 6. 2 Stitching
9. 6. 3 Black Brightness Correct
9. 6. 4 Other menu on Adjustment
9. 6. 5 Operation Check
9. 7 Input Check
9. 7. 1 Getting Input Signal
9. 7. 2 Signal List
9. 8 Error Check
9. 8. 1 Getting Error Status
9. 8. 2 Error List
9. 9 Counter
9.10 Reset

Chapter 10. APPENDIX

& Parts Catalog.

KIP 7570 KIP7570 kip75 series KIP7570 KIP75SERIES