Ricoh MP6001 MP6001SP MP7001 MP7001SP MP8001 MP8001SP MP9001 MP9001SP Service Manual and Parts List Manual (product code D062 D063 D065 D066)


Accurate, clear and concise text, combined with detailed illustrations, lists of error code, instruction and diagrams, guide you through procedure of repair, remediate, maintenance and adjustments your copier, printer or scanner.
Present service manual and parts list manual Ricoh MP6001 MP6001SP MP7001 MP7001SP MP8001 MP8001SP MP9001 MP9001SP (product code D062 D063 D065 D066) contain clear instructions and procedures on how to fix the problems occurring in your equipment.
The information contained in this repair manual is necessary for the repair, but also prevention, resulting in a longer life of your equipment.
Format of the manual: PDF, makes it easy to navigate, instant download and print. English language.
To see what contain, please read table of contents:

Contents for SERVICE MANUAL:
PRODUCT INFORMATION
1. PRODUCT INFORMATION
1.1 SPECIFICATIONS
1.2 MACHINE CONFIGURATION
1.3 GUIDANCE FOR THOSE WHO ARE FAMILIAR WITH PREDECESSOR PRODUCTS
1.4 OVERVIEW
1.4.1 MECHANICAL COMPONENT LAYOUT
1.4.2 PAPER PATH (WITH COVER INTERPOSER TRAY)
1.4.3 PAPER PATH (WITH 9-BIN MAILBOX)
1.4.4 DRIVE LAYOUT

INSTALLATION
2. INSTALLATION
2.1 INSTALLATION REQUIREMENTS
2.1.1 OPERATING ENVIRONMENT
2.1.2 MACHINE LEVEL
2.1.3 MINIMUM SPACE REQUIREMENTS
2.1.4 DIMENSIONS
2.1.5 PERIPHERAL/OPTION SUMMARY TABLE
2.1.6 POWER REQUIREMENTS
2.2 MAIN MACHINE
2.2.1 ACCESSORY CHECK
2.2.2 INSTALLATION PROCEDURE
Removing Tapes and Retainers
Removing and Filling the Development Unit
Re-installing the Development Unit
Initializing the Drum Settings
Tandem Tray
Machine Level
Date/Time Setting
SP Codes
Connecting the Drum Heater Connector and the Tray Heater Connector
Installing the Scanner Heater
2.3 A3/DLT FEEDER KIT (D482)
2.3.1 ACCESSORY CHECK
2.3.2 INSTALLATION PROCEDURE
2.4 LCT (B473)
2.4.1 ACCESSORY CHECK
2.4.2 INSTALLATION PROCEDURE
Removing Tape
Preparing the Main Machine
Installing the LCT
2.5 LG/B4 FEEDER KIT (B474)
2.5.1 ACCESSORY CHECK
2.5.2 INSTALLATION PROCEDURE
2.6 MULTI FOLDING UNIT (D454)
2.6.1 ACCESSORIES
2.6.2 INSTALLATION
Tapes
Paper Guide, Sponge Strip
Ground Plate
Docking
Height Adjustment
Power Cord, Breaker Switch Test
Proof Tray Auxiliary Plate
2.7 3000-SHEET FINISHER (D460)
2.7.1 ACCESSORY CHECK
2.7.2 INSTALLATION
2.8 PUNCH UNIT (B531)
2.8.1 ACCESSORY CHECK
2.8.2 INSTALLATION
2.9 JOGGER UNIT (B513)
2.9.1 ACCESSORY CHECK
2.9.2 INSTALLATION PROCEDURE
2.10 2000/3000-SHEET FINISHERS (D373/D374)
2.10.1 ACCESSORIES
2.10.2 INSTALLATION PROCEDURE
Removing Tapes and Retainers
Docking the Finisher
Attaching the Trays
Leveling the Finisher
Selecting the Staple Supply Name
Enabling Booklet Binding (D373 Only)
Auxiliary Trays
2.11 PUNCH UNIT (B702)
2.11.1 ACCESSORIES
2.11.2 INSTALLATION PROCEDURE
2.12 COVER INTERPOSER TRAY (B704)
2.12.1 ACCESSORIES
2.12.2 INSTALLATION PROCEDURE
Removing Tapes and Retainers
Preparing the Finisher (D373/D374/D460)
Attaching the Extensions for the D460
Prepare the Cover Interposer for the D460
Attach the Extensions to the D460
Attaching the Extensions for the D373/D374
SM iii D062/D062/D065/D066
Attaching the Interposer Tray (D373/D374/D460)
Attaching the Corner Plates for the D460
Docking the Finisher and Interposer to the Machine (D373/D374/D460)
2.13 OUTPUT JOGGER UNIT (B703)
2.13.1 ACCESSORIES
2.13.2 INSTALLATION PROCEDURE
2.14 MAIL BOX (B762)
2.14.1 ACCESSORY CHECK
2.14.2 INSTALLATION PROCEDURE
2.15 COPY TRAY (B756)
2.15.1 ACCESSORIES
2.15.2 INSTALLATION
2.16 KEY CARD BRACKET (B498), KEY COUNTER BRACKET (B452)
2.16.1 KEY CARD BRACKET B498 ACCESSORIES
2.16.2 KEY COUNTER BRACKET B452 ACCESSORIES
2.16.3 INSTALLATION
Assemble the Key Counter Bracket
Install the Key Card Bracket and Assembled Key Counter
2.17 KEY COUNTER TYPE A (B870)
2.17.1 INSTALLATION
2.18 COPY CONNECTOR KIT (B328)
2. 18.1 ACCESSORIES
2. 18.2 PREPARATION
2. 18.3 INSTALLATION
2.19 USB2.0/SD SLOT TYPE C (D464)
2. 19.1 ACCESSORIES
2. 19.2 INSTALLATION
2.20 MFP OPTIONS
2. 20.1 MERGING APPLICATIONS ON ONE SD CARD
Overview
Merging Applications
Undo Exec
2.19.2 COMMON PROCEDURES
Inserting SD Cards
Storing Copied SD Cards
2.20.3 PRINTER SCANNER UNIT (D462)
Accessories
Installation
2.20.4 POSTSCRIPT3 UNIT (D462-20/22/23)
Accessories
Installation
2.20.5 IEEE802.11A/G INTERFACE UNIT TYPE J (D377)
Accessories
Installation
SP Mode Settings for 802.11a/g Wireless LAN
2.20.6 BLUETOOTH INTERFACE UNIT TYPE C (B826)
Accessories
Installation
2.20.7 FILE FORMAT CONVERTER TYPE E (D377)
Accessory Check
Installation
2.20.8 HDD ENCRYPTION UNIT TYPE A (D377)
Accessory
Before You Begin the Procedure
Seal Check and Removal
Installation Procedure
Recovery from a Device Problem
Restoring the encryption key
Clearing the NVRAM
2.20.9 DATA OVERWRITE SECURITY UNIT TYPE H (D377-06)
Accessories
Before You Begin
Seal Check and Removal
Installation
2.20.10 BROWSER UNIT TYPE E (D430)
Accessories
Installation
2.20.11 COPY DATA SECURITY UNIT TYPE C (B829)
Accessories
Installation
IPU
After Replacing the Copy Data Security Unit
2.20.12 VM CARD (D463)
Accessories
Installation
2.20.13 IEEE1284 (B679)
Accessories
Installation
2.20.14 GIGABIT ETHERNET TYPE B (D377)
Accessories
Installation
2.20.15 TESTING THE SD CARD/USB SLOT

PREVENTIVE MAINTENANCE
3. PREVENTIVE MAINTENANCE
3.1 PM TABLES

REPLACEMENT AND ADJUSTMENT
4. REPLACEMENT AND ADJUSTMENT
4.1 GENERAL CAUTIONS
4.1.1 DRUM
4.1.2 DRUM UNIT
4.1.3 TRANSFER BELT UNIT
4.1.6 CHARGE CORONA
4.1.7 DEVELOPMENT
4.1.8 CLEANING
4.1.9 FUSING UNIT
4.1.10 PAPER FEED
4.1.11 USED TONER
4.2 SPECIAL TOOLS AND LUBRICANTS
4.2.1 SPECIAL TOOLS
4.2.2 LUBRICANTS
4.3 OPERATION PANEL AND EXTERNAL COVERS
4.3.1 OPERATION PANEL
4.3.2 FRONT DOOR
4.3.3 RIGHT COVERS
4.3.4 LEFT COVERS
4.3.5 REAR COVERS
4.4 SCANNER
4.4.1 ADF AND TOP COVERS
ADF
Top Covers
4.4.2 EXPOSURE GLASS
4.4.3 SCANNER ORIGINAL SIZE SENSORS
4.4.4 LENS BLOCK
4.4.5 EXPOSURE LAMP
4.4.6 SIOB
4.4.7 SCANNER MOTOR
4.4.8 SCANNER HP SENSOR
4.4.9 SCANNER WIRE REPLACEMENT
Scanner Wire Removal
Scanner Wire Reinstallation and Scanner Position Adjustment
4.5 LASER UNIT
4.5.1 CAUTION DECALS
4.5.2 LD UNIT, POLYGON MOTOR AND POLYGON MOTOR DRIVE BOARD
SP Adjustments
4.5.3 LASER SYNCHRONIZATION DETECTOR REPLACEMENT
4.5.4 LASER UNIT ALIGNMENT
4.6 DRUM UNIT
4.6.1 DEVELOPMENT UNIT REMOVAL
Drum Removal
Drum Re-installation
Replacement with a Used Development Unit
4.6.2 CHARGE CORONA UNIT
4.6.3 CHARGE CORONA WIRE AND GRID
4.6.4 CHARGE CORONA WIRE CLEANING PADS
4.6.5 OPC DRUM REMOVAL
Dusting the Drum Surface
4.6.6 PTL
4.6.7 QUENCHING LAMP
4.6.8 DRUM POTENTIAL SENSOR
4.6.9 CLEANING FILTER
4.6.10 CLEANING BLADE
4.6.11 CLEANING BRUSH
4.6.12 PICK-OFF PAWLS
4.6.13 ID SENSOR
4.6.14 DRUM MOTOR
4.6.15 TONER COLLECTION BOTTLE
4.6.16 TONER SEPARATION UNIT
4.6.17 OZONE FILTERS
4.6.18 OPTICS DUST FILTER
4.6.19 INTERNAL DUST FILTER
4.6.20 TONER COOLING FAN
4.7 DEVELOPMENT UNIT
4.7.1 DEVELOPER REPLACEMENT
Preparation
Removal
Reinstallation
4.7.2 DEVELOPMENT FILTER
4.7.3 ENTRANCE SEAL AND SIDE SEALS
Removal
Reinstalling
4.7.4 TD SENSOR
4.7.5 TONER END SENSOR
4.7.6 TONER SUPPLY MOTOR
Cleaning Requirement
4.7.7 DEVELOPMENT MOTOR
4.8 TRANSFER BELT UNIT
4.8.1 TRANSFER BELT UNIT REMOVAL
4.8.2 TRANSFER BELT REMOVAL
Re-installation
4.8.3 TRANSFER ROLLER CLEANING BLADE
4.8.4 DISCHARGE PLATE
Reinstallation
4.8.5 TRANSFER POWER PACK
Re-installation
4.9 FUSING UNIT
4.9.1 FUSING UNIT REMOVAL
4.9.2 FUSING UNIT THERMISTORS AND THERMOSTATS
Reinstallation
4.9.3 WEB CLEANING ROLLER
Web Unit Disassembly
Reinstallation
Web Unit Re-assembly
4.9.4 WEB MOTOR AND WEB END SENSOR
Reinstallation
4.9.5 PRESSURE ROLLER CLEANING UNIT
Reinstallation
4.9.6 FUSING LAMPS, HOT ROLLER, AND PRESSURE ROLLER
Fusing Lamps
Hot Roller and Pressure Roller
4.9.7 PRESSURE ROLLER
Spring Adjustment
4.9.8 STRIPPER PAWLS
4.9.9 NIP BAND WIDTH ADJUSTMENT
4.9.10 FUSING UNIT EXIT SENSOR
4.9.11 FUSING/EXIT MOTOR
4.9.12 FUSING EXIT SENSOR AND EXIT UNIT ENTRANCE SENSORS
4.10 DUPLEX UNIT
4.10.1 DUPLEX UNIT REMOVAL
Reinstallation
4.10.2 DUPLEX UNIT SIDE-TO-SIDE ADJUSTMENT
4.10.3 JOGGER FENCE ADJUSTMENT
4.10.4 DUPLEX MOTORS
Duplex Inverter Motor
Duplex Jogger and Transport Motors
4.10.5 DUPLEX SENSORS
Jogger HP Sensor
Duplex Entrance Sensor
Duplex Transport Sensor 3
Inverter Exit Sensor, Transport Sensors 1 & 2
4.10.6 DUPLEX JOGGER BELT ADJUSTMENT
4.11 PAPER FEED
4.11.1 PAPER TRAY
Tandem Tray
Universal Tray
4.11.2 REAR FENCE RETURN SENSOR REPLACEMENT
4.11.3 REAR FENCE HP SENSOR REPLACEMENT
4.11.4 TANDEM RIGHT TRAY PAPER SENSOR REPLACEMENT
4.11.5 BOTTOM PLATE LIFT WIRE REPLACEMENT
Reinstallation
4.11.6 TANDEM TRAY PAPER SIZE CHANGE
4.11.7 TANDEM TRAY SIDE REGISTRATION
4.11.8 PICK-UP, FEED, SEPARATION ROLLER REPLACEMENT
4.11.9 FEED UNIT
4.11.10 PAPER FEED MOTORS
For D062/D063
For D065/D066
4.11.11 SEPARATION ROLLER PRESSURE ADJUSTMENT
4.11.12 RELAY SENSOR
4.11.13 BY-PASS PAPER SIZE DETECTION BOARD
Reinstallation
4.11.14 BY-PASS TRAY ROLLERS
4.11.15 BY-PASS SEPARATION ROLLER PRESSURE ADJUSTMENT
4.11.16 REGISTRATION SENSOR
4.11.17 REGISTRATION AND BY-PASS UNIT REMOVAL
4.12 PCBS AND HDD
4.12.1 CNT BOARD (CONTROLLER BOARD)
Reinstallation of CNT Board
4.12.2 NVRAM
NVRAM on the BCU
NVRAM on the Controller
4.12.3 IPU
4.12.4 HDD
Reinstallation
4.12.5 CTL-PSU
4.12.6 BCU
Replace the BCU
4.12.7 CNB
4.12.8 PFB
4.12.9 DRB
4.12.10 PSU
Reinstallation of PSU
4.13 ADF
4.13.1 ADF COVERS
4.13.2 FEED UNIT
4.13.3 FEED BELT AND PICK-UP ROLLER
4.13.4 SEPARATION ROLLER
4.13.5 REGISTRATION SENSOR
4.13.6 ADF CONTROL BOARD
4.13.7 ORIGINAL WIDTH, INTERVAL, SEPARATION AND SKEW CORRECTION SENSORS
4.13.8 ORIGINAL LENGTH SENSORS
4.13.9 DF POSITION AND APS SENSORS
4.13.10 OTHER ADF SENSORS
4.13.11 BOTTOM PLATE LIFT MOTOR
4.13.12 FEED MOTOR
4.13.13 EXIT MOTOR AND TRANSPORT MOTOR
4.13.14 PICK-UP ROLLER MOTOR AND HP SENSOR
4.13.15 CIS UNIT
4.13.16 ADF EXIT SENSOR
4.13.17 ADF TRANSPORT BELT ASSEMBLY
Reinstallation
Removing the Belt
Reinstalling the Belt
Reattaching the White Cover
4.14 COPY IMAGE ADJUSTMENTS: PRINTING/SCANNING
4.14.1 IMAGE ADJUSTMENTS: PRINTING
Preparation
Registration – Leading Edge/Side-to-Side
Blank Margin
Registration Buckle Adjustment
4.14.2 IMAGE ADJUSTMENTS: SCANNING
Registration: Platen Mode
Magnification
Sub Scan Magnification
4.14.3 ADF SCANNING ADJUSTMENTS
Vertical Black Lines
DIP Switch Settings (ADF Main Board)
ADF Skew Correction
4.15 TOUCH SCREEN CALIBRATION

SYSTEM MAINTENANCE
5. SYSTEM MAINTENANCE
5.1 SERVICE PROGRAM MODE
5.1.1 GENERAL NOTES
5.1.2 SERVICE MODE LOCK/UNLOCK
5.1.3 TO ENTER AND EXIT THE SERVICE PROGRAM MODE
5.1.4 TO SWITCH TO THE COPY WINDOW FOR TEST PRINTING
Using the SP Mode
Direct Entry
Button Selection Entry
5.1.5 SP MODE BUTTON SUMMARY
5.1.6 SP MODE PRINT (SMC PRINT)
5.2 RESETS
5.2.1 MEMORY ALL CLEAR: SP5801
5.2.2 SOFTWARE AND SETTING RESET
Software Reset
Resetting the System
Resetting Copy/Document Server Features Only
Resetting Scanner Features Only
5.3 TEST PATTERN PRINTING
5.3.1 PRINTING TEST PATTERN: SP2902-003
Test Pattern Table
5.3.2 IPU FRONT/BACK TEST PATTERNS: SP2902-001,002
Test Pattern Table
5.3.3 IPU PRINTING TEST PATTERN: SP2902-004
5.4 UPDATING THE FIRMWARE
5.4.1 SOFTWARE UPDATE
Software Update Procedure
Doing the Software Update Procedure
Errors During Firmware Update
Updating the LCDC for the Operation Panel
Downloading Stamp Data
5.4.2 UPLOADING/DOWNLOADING NVRAM DATA
Uploading Content of NVRAM to an SD card
Downloading an SD Card to NVRAM
5.5 SERVICE PROGRAM MODE TABLES
5.5.1 SP TABLES
5.6 INPUT/OUTPUT CHECK
5.7 USING THE DEBUG LOG
5.7.1 SETTING UP “SAVE DEBUG LOG”
To Switch Debug Log On
To Select the Target for the Debug Log File
To Select Events
To select one or more memory modules for recording in the debug log file
5.7.2 RETRIEVING THE DEBUG LOG FROM THE HDD
5.7.3 MORE ABOUT DEBUG LOG
SP5857-015: SD to SD (Any)
SP5857-016: Make HDD LogFile
SP5857-017: Make SD Log File
5.8 DIP SWITCH TABLES
5.8.1 BCU (BASE ENGINE CONTROL UNIT)
BCU Base Board DIP SW101

TROUBLESHOOTING
6. TROUBLESHOOTING
6.1 SERVICE CALL CONDITIONS
6.2 IMPORTANT SP CODES
6.3 JAM DETECTION
6.3.1 SENSOR LOCATIONS
6.3.2 FREQUENT PAPER JAMS
6.4 PROGRAM DOWNLOAD
6.4.1 RECOVERY METHODS
6.4.2 DOWNLOAD ERROR CODES
6.5 TIMING CHARTS
6.5.1 FEED, TRANSPORT, FEED OUT: FACE-UP
6.5.2 TRANSPORT, INVERTER, FEED OUT: FACE-DOWN
6.5.3 DUPLEX TRANSPORT
6.6 OTHER PROBLEMS
6.6.1 BLOWN FUSE CONDITIONS
6.6.2 COMMON PROBLEMS

ENERGY SAVING
7. ENERGY SAVING
7.1 ENERGY SAVE
7.1.1 ENERGY SAVER MODES
Timer Settings
Return to Stand-by Mode
Recommendation
7.1.2 ENERGY SAVE EFFECTIVENESS
7.2 PAPER SAVE
7.2.1 EFFECTIVENESS OF DUPLEX/COMBINE FUNCTION
1. Duplex:
2. Combine mode:
3. Duplex + Combine:
D062

D062/D063/D065/D066 APPENDICES
SEE APPENDIX SECTION FOR DETAILED TABLE OF CONTENTS
B473 LARGE CAPACITY TRAY RT43
SEE SECTION B473 FOR DETAILED TABLE OF CONTENTS
B513 OUTPUT JOGGER UNIT TYPE 1075/B531 PUNCH UNIT
TYPE 1075
SEE SECTION B513/B531 FOR DETAILED TABLE OF CONTENTS
B704 COVER INTERPOSER TRAY TYPE 3260
SEE SECTION B704 FOR DETAILED TABLE OF CONTENTS
B762 MAILBOX CS391
SEE SECTION B762 FOR DETAILED TABLE OF CONTENTS
D373 FINISHER SR4040/D374 FINISHER SR4030
SEE SECTION D373/D374 FOR DETAILED TABLE OF CONTENTS
D418 FAX OPTION TYPE 9001
SEE SECTION D418 FOR DETAILED TABLE OF CONTENTS
D454 MULTI-FOLDING UNIT FD5000
SEE SECTION D454 FOR DETAILED TABLE OF CONTENTS

Contents for PARTS LIST:
D062/D063/D065/D066 PARTS LOCATION AND LIST Location of Unit
1. Exterior 1 (D062/D063/D065/D066)
2. Exterior 2 (D062/D063/D065/D066)
3. Exterior 3 (D062/D063/D065/D066)
4. Exterior 4 (D062/D063/D065/D066)
5. Operation Panel (D062/D063/D065/D066)
6. DF Exterior (D062/D063/D065/D066)
7. DF Original Feed 1 (D062/D063/D065/D066)
8. DF Original Feed 2 (D062/D063/D065/D066)
9. DF Original Transfer 1 (D062/D063/D065/D066)
10. DF Original Transfer 2(D062/D063/D065/D066)
11. DF Original Transfer 3(D062/D063/D065/D066)
12. DF Original Transfer 4(D062/D063/D065/D066)
13. DF Original Exit (D062/D063/D065/D066)
14. DF Drive/Electrical 1 (D062/D063/D065/D066)
15. DF Drive/Electrical 2 (D062/D063/D065/D066)
16. DF Frame Section (D062/D063/D065/D066)
17. Optics Section 1 (D062/D063/D065/D066)
18. Optics Section 2 (D062/D063/D065/D066)
19. Optics Section 3 (D062/D063/D065/D066)
20. Optics Section 4 (D062/D063/D065/D066)
21. Laser Unit (D062/D063/D065/D066)
22. Tandem Tray 1 (D062/D063/D065/D066)
23. Tandem Tray 2 (D062/D063/D065/D066)
24. Tandem Tray 3 (D062/D063/D065/D066)
25. Universal Tray (D062/D063/D065/D066)
26. By-pass Feed Tray (D062/D063/D065/D066)
27. Paper Feed Unit 1 (D062/D063/D065/D066)
28. Paper Feed Unit 2 (D062/D063/D065/D066)
29. Vertical Transport (D062/D063/D065/D066)
30. Paper Registration 1 (D062/D063/D065/D066)
31. Paper Registration 2 (D062/D063/D065/D066)
32. Paper Registration 3 (D062/D063/D065/D066)
33. Toner Hopper Section (D062/D063/D065/D066)
34. Toner Supply Unit (D062/D063/D065/D066)
35. Development Unit 1 (D062/D063/D065/D066)
36. Development Unit 2 (D062/D063/D065/D066)
37. Charge Unit (D062/D063/D065/D066)
38. PCU 1 (D062/D063/D065/D066)
39. PCU 2 (D062/D063/D065/D066)
40. PCU 3 (D062/D063/D065/D066)
41. Transfer Belt Unit 1 (D062/D063/D065/D066)
42. Transfer Belt Unit 2 (D062/D063/D065/D066)
43. Fusing Unit 1 (D062/D063/D065/D066)
44. Fusing Unit 2 (D062/D063/D065/D066)
45. Fusing Unit 3 (D062/D063/D065)
46. Fusing Unit 4 (D066)
47. Fusing Unit 5 (D062/D063/D065)
48. Fusing Unit 6 (D066)
49. Paper Exit Section 1 (D062/D063/D065/D066)
50. Paper Exit Section 2 (D062/D063/D065/D066)
51. Paper Exit Section 3 (D062/D063/D065/D066)
52. Duplex Unit 1 (D062/D063/D065/D066)
53. Duplex Unit 2 (D062/D063/D065/D066)
54. Duplex Unit 3 (D062/D063/D065/D066)
55. Duplex Unit 4 (D062/D063/D065/D066)
56. Duplex Unit 5 (D062/D063/D065/D066)
57. Waste Toner Collection Transport
58. Drive Section 1 (D062/D063/D065/D066)
59. Drive Section 2 (D062/D063/D065/D066)
60. Drive Section 3 (D065/D066)
61. Electrical Section 1 (D062/D063/D065/D066)
62. Electrical Section 2 (D062/D063/D065/D066)
63. Electrical Section 3 (D062/D063/D065/D066)
64. Electrical Section 4 (D062/D063/D065/D066)
65. Electrical Section 5 (D062/D063/D065/D066)
66. Electrical Section 6 (D062/D063/D065/D066)
67. Electrical Section 7 (D062/D063/D065/D066)
68. Electrical Section 8 (D062/D063/D065/D066)
69. Electrical Section 9 (D062/D063/D065/D066)
70. Frame Section 1 (D062/D063/D065/D066)
71. Frame Section 2 (D062/D063/D065/D066)
72. Frame Section 3 (D062/D063/D065/D066)
73. Frame Section 4 (D062/D063/D065/D066)
74. Frame Section 5 (D062/D063/D065/D066)
75. BCU Board (D062/D063/D065/D066)
76. IPU Board (D062/D063/D065/D066)
77. Control Board (D062/D063/D065/D066)
78. Decal and Documents(D062/D063/D065/D066)
79. Special Tools (D062/D063/D065/D066)

D062/D063/D065/D066 PARTS INDEX
PARTS INDEX

COPY CONNECTOR TYPE 3260 B328 PARTS LOCATION AND LIST
1. COPY CONNECTOR (B328)

COPY CONNECTOR TYPE 3260 B328 PARTS INDEX
PARTS INDEX

KEY COUNTER BRACKET TYPE 1027/OPTIONAL COUNTER INTERFACE UNIT TYPE A B452/B870 PARTS LOCATION AND LIST
1. Key Counter/Optional Counter Interface (B452/B870)

KEY COUNTER BRACKET TYPE 1027/OPTIONAL COUNTER INTERFACE UNIT TYPE A B452/B870 PARTS INDEX
PARTS INDEX

LCT RT43/LG SIZE TRAY TYPE 1075 B473/B474 PARTS LOCATION AND LIST
1. EXTERIOR (B473)
2. PAPER FEED 1 (B473)
3. PAPER FEED 2 (B473)
4. TRAY DRIVE 1 (B473)
5. TRAY DRIVE 2 (B473)
6. TRAY DRIVE 3 (B473)
7. TRAY EXTENSION KIT (B474)
8. A3 PAPER TRAY KIT 1 (B475)
9. A3 PAPER TRAY KIT 2 (B475)
10. MAIN CONTROL BOARD (B473)
11. DECALS AND DOCUMENTS (B473/B475)

LCT RT43/LG SIZE TRAY TYPE 1075 B473/B474 PARTS INDEX
PARTS INDEX

TAB SHEET HOLDER TYPE 3260 B499 PARTS LOCATION AND LIST
1. TAB SHEET HOLDER (B499)

TAB SHEET HOLDER TYPE 3260 B499 PARTS INDEX
PARTS INDEX

OUTPUT JOGGER UNIT TYPE 1075 B513 PARTS LOCATION AND LIST
1. JOGGER UNIT (B513)

OUTPUT JOGGER UNIT TYPE 1075 B513 PARTS INDEX
PARTS INDEX

PUNCH UNIT TYPE 1075 B531 PARTS LOCATION AND LIST
1. PUNCH UNIT (B531)

PUNCH UNIT TYPE 1075 B531 PARTS INDEX
PARTS INDEX

PUNCH UNIT TYPE 3260 B702 PARTS LOCATION AND LIST
1. Punch Unit 1 (B702)
2. Punch Unit 2 (B702)

PUNCH UNIT TYPE 3260 B702 PARTS INDEX
PARTS INDEX

OUTPUT JOGGER UNIT TYPE 3260 B703 PARTS LOCATION AND LIST
1. Output Jogger Unit (B703)

OUTPUT JOGGER UNIT TYPE 3260 B703 PARTS INDEX
PARTS INDEX

COVER INTERPOSER TRAY TYPE 3260 B704 PARTS LOCATION AND LIST
1. Exterior (B704)
2. Original Feed 1 (B704)
3. Original Feed 2 (B704)
4. Original Feed 3 (B704)
5. Original Transfer (B704)
6. Drive And Electrical (B704)

COVER INTERPOSER TRAY TYPE 3260 B704 PARTS INDEX
PARTS INDEX

COPY TRAY TYPE 2075 B756 PARTS LOCATION AND LIST
1. COPY TRAY (B756)

COPY TRAY TYPE 2075 B756 PARTS INDEX
PARTS INDEX

MAILBOX CS391 B762 PARTS LOCATION AND LIST
1. EXTERIOR (B762)
2. PAPER EXIT 1 (B762)
3. PAPER EXIT 2 (B762)
4. PAPER EXIT 3 (B762)

MAILBOX CS391 B762 PARTS INDEX
PARTS INDEX

FINISHER SR4040 D373-57 PARTS LOCATION AND LIST
1. Exterior (D373)
2. Paper Transfer (D373)
3. Shift Transfer Section 1 (D373)
4. Shift Transfer Section 2 (D373)
5. Shift Transfer Section 3 (D373)
6. Paper Exit 1 (D373)
7. Paper Exit 2 (D373)
8. Staple Transfer Section 1 (D373)
9. Staple Transfer Section 2 (D373)
10. Staple Tray 1 (D373)
11. Staple Tray 2 (D373)
12. Staple Tray 3 (D373)
13. Staple Tray 4 (D373)
14. Staple Tray 5 (D373)
15. Staple Tray 6 (D373)
16. Paper fold Section 1 (D373)
17. Paper fold Section 2 (D373)
18. Paper fold Section 3 (D373)
19. Shift Tray (D373)
20. Drive Section 1 (D373)
21. Drive Section 2 (D373)
22. Drive Section 3 (D373)
23. Electrical Section (D373)
24. Frame Section (D373)
25. Decals and Documents (D373)

FINISHER SR4040 D373-57 PARTS INDEX
PARTS INDEX

FINISHER SR4030 D374-57 PARTS LOCATION AND LIST
1. Exterior (D374)
2. Paper Transfer (D374)
3. Shift Transfer Section 1 (D374)
4. Shift Transfer Section 2 (D374)
5. Shift Transfer Section 3 (D374)
6. Paper Exit 1 (D374)
7. Paper Exit 2 (D374)
8. Staple Transfer Section 1 (D374)
9. Staple Transfer Section 2 (D374)
10. Staple Tray 1 (D374)
11. Staple Tray 2 (D374)
12. Staple Tray 3 (D374)
13. Staple Tray 4 (D374)
14. Shift Tray (D374)
15. Drive Section 1 (D374)
16. Drive Section 2 (D374)
17. Drive Section 3 (D374)
18. Electrical Section (D374)
19. Frame Section (D374)
20. Decals and Documents (D374)

FINISHER SR4030 D374-57 PARTS INDEX
PARTS INDEX

FAX OPTION/G3 INTERFACE TYPE 9001 D418 PARTS LOCATION AND LIST
1. Fax Unit (D418)
2. G3 Unit (D418)

FAX OPTION/G3 INTERFACE TYPE 9001 D418 PARTS INDEX
PARTS INDEX

MULTI-FOLDING UNIT FD5000 D454 PARTS LOCATION AND LIST
1. Exterior 1 (D454)
2. Exterior 2 (D454)
3. Paper Transfer:Entrance (D454)
4. Paper Transfer 1 (D454)
5. Paper Transfer 2 (D454)
6. Paper Transfer 3 (D454)
7. Fold Unit 1 (D454)
8. Fold Unit 2 (D454)
9. Fold Unit 3 (D454)
10. Fold Unit 4 (D454)
11. Fold Unit 5 (D454)
12. Fold Unit 6 (D454)
13. Fold Unit 7 (D454)
14. Fold Unit 8 (D454)
15. Fold Unit 9 (D454)
16. Fold Unit 10 (D454)
17. Fold Unit 11 (D454)
18. Fold Unit 12 (D454)
19. Fold Unit 13 (D454)
20. Fold Unit 14 (D454)
21. Fold Unit 15 (D454)
22. Fold Unit 16 (D454)
23. Fold Unit 17 (D454)
24. Fold Unit 18 (D454)
25. Fold Unit 19 (D454)
26. Fold Unit 20 (D454)
27. Fold Unit 21 (D454)
28. Fold Unit 22 (D454)
29. Paper Exit Section 1 (D454)
30. Paper Exit Section 2 (D454)
31. Paper Exit Section 3 (D454)
32. Drive Section (D454)
33. Electrical Section (D454)
34. Frame Section (D454)

MULTI-FOLDING UNIT FD5000 D454 PARTS INDEX
PARTS INDEX

FINISHER SR4050 D460 PARTS LOCATION AND LIST
1. Exterior (D460)
2. Paper Transfer:Entrance (D460)
3. Paper Transfer:Proof Tray (D460)
4. Proof Tray Exit Section (D460)
5. Paper Transfer:Staple 1 (D460)
6. Paper Transfer:Staple 2 (D460)
7. Staple Tray Unit 1 (D460)
8. Staple Tray Unit 2 (D460)
9. Staple Tray Unit 3 (D460)
10. Staple Tray Unit 4 (D460)
11. Staple Tray Unit 5 (D460)
12. Staple Tray Unit 6 (D460)
13. Paper Tray Drive Section 1 (D460)
14. Paper Tray Drive Section 2 (D460)
15. Paper Tray Drive Section 3 (D460)
16. Paper Tray Drive Section 4 (D460)
17. Paper Tray Drive Section 5 (D460)
18. Drive Section (D460)
19. Electrical Section (D460)
20. Frame Section 1 (D460)
21. Frame Section 2 (D460)

FINISHER SR4050 D460 PARTS INDEX
PARTS INDEX

MFP CONTROLLER OPTIONS B328/B679/B826/B829/D377/ D430/D462/D463 PARTS LOCATION AND LIST
1. MFP Controller Options 1
2. MFP Controller Options 2

MFP CONTROLLER OPTIONS B328/B679/B826/B829/D377/ D430/D462/D463 PARTS INDEX
PARTS INDEX

Number of pages: 1651.