Ricoh Pro 907EX Pro 1107EX Pro 1357EX Service Manual and Parts List Manual (product code D059 D060 D061)


Accurate, clear and concise text, combined with detailed illustrations, lists of error code, instruction and diagrams, guide you through procedure of repair, remediate, maintenance and adjustments your copier, printer or scanner.
Present service manual and parts list manual Ricoh Pro 907EX Pro 1107EX Pro 1357EX (product code D059 D060 D061) contain clear instructions and procedures on how to fix the problems occurring in your equipment.
The information contained in this repair manual is necessary for the repair, but also prevention, resulting in a longer life of your equipment.
Format of the manual: PDF, makes it easy to navigate, instant download and print. English language.
To see what contain, please read table of contents:

INSTALLATION
1. INSTALLATION
1.1 INSTALLATION REQUIREMENTS
1.1.1 ENVIRONMENT
1.1.2 POWER REQUIREMENTS
1.1.3 MACHINE LEVEL
1.1.4 CONFIGURATION RULES
Configuration 1
Configuration 2
1.1.5 SPACE REQUIREMENTS
Space Around
Total Space Required
1.1.6 BEFORE YOU BEGIN
1.2 MAIN MACHINE (D059/D060/D061)
1.2.1 ACCESSORIES
1.2.2 INSTALLATION
Rating Voltage for Peripheral Units at Connection Points
External Tape and Retainers
Internal Tape and Retainers: Paper Trays
Internal Tape and Retainers: Fusing Unit
Internal Tape and Retainers: Transfer Unit
Internal Tape and Retainers: Drum Cleaning Unit
Pouring Developer
Reinstalling the Development Unit
Operation Panel
Filters, Original Exit Tray
Initializing the Machine
Power Cord, Breaker Switch Test
Connecting the Tray Heaters of the Main Machine
1.2.3 COMPLETING THE INSTALLATION
Setting Paper Sizes for the Paper Trays
TCRU Safety Label for Fusing Unit
1.2.4 CONTROLLER BOX, PSU BOX REMOVAL
Removing the Controller Box
Removing the PSU Box
1.2.5 TRANSPORTING THE MAIN MACHINE
Before Moving the Main Machine
After Moving the Main Machine
1.3 A3/11″X17″ TRAY UNIT TK5010 (B331-14)
1.3.1 ACCESSORIES
1.3.2 INSTALLATION
1.4 LCIT RT5030 (D452-17)
1.4.1 ACCESSORIES
1.4.2 INSTALLATION
Tapes, Retainers
Docking
Height Adjustment
1.4.3 IMAGE POSITION SENSOR, PAPER REGISTRATION
ADJUSTMENT
1.4.4 LCIT (D452) TRAY HEATERS
Accessories
Installation
1.5 LCIT RT5040 (D453-17)
1.5.1 ACCESSORIES
1.5.2 INSTALLATION
Tapes, Retainers
Docking
Height Adjustment
1.5.3 IMAGE POSITION SENSOR, PAPER REGISTRATION
ADJUSTMENT
1.5.4 COATED PAPER AND NCR
Coated Paper
NCR
1.5.5 LCIT (D453) TRAY HEATERS
Accessories
Installation
1.6 MULTI BYPASS TRAY BY5000 (B833-17)
1.6.1 ACCESSORIES
1.6.2 INSTALLATION
Before Installing the Multi Bypass Tray
LCIT (D452)
LCIT (D453)
Both LCIT Units
1.7 UNIT DU5000 (D457-17)
1.7.1 ACCESSORIES
1.7.2 INSTALLATION
Tapes
Mylars
Docking
Height Adjustment
1.8 PERFECT BINDER (D391)
1.9 COVER INTERPOSER TRAY CI5010 (B835)
1.9.1 ACCESSORIES
1.9.2 INSTALLATION
Tapes
Attaching the Black Mylar to the Downstream Unit
Sponge Strip, Paper Guide, Ground Plate
Docking the Tray Transport Unit to the Unbend Unit (D457)
Docking
Dock the Downstream Peripheral Device
Mounting the Tray Unit
1.10 MULTI FOLDING UNIT (D454)
1.10.1 ACCESSORIES
1.10.2 INSTALLATION
Tapes
Paper Guide, Sponge Strip
Ground Plate
Docking
Removing Parts for the Cover Interposer Tray (B835)
Height Adjustment
Power Cord, Breaker Switch Test
Check for Skew and Correct Side-to-Side Registration
D059/D060/D061 iv SM
Proof Tray Auxiliary Plate
1.11 RING BINDER (D392)
1.12 HIGH CAPACITY STACKER (D447)
1.12.1 ACCESSORIES
1.12.2 INSTALLATION
Shipping Tapes
Paper Guide, Sponge Strip, Ground Plate
Docking
Lock Hasps
Height Adjustment
Power Cord, Breaker Switch Test
Check for Skew and Correct Side-to-Side Registration
Docking: Downstream
Roll-Away Cart (D456)
1.13 BOOKLET FINISHER SR5020 (D434-17)
1.13.1 ACCESSORIES
1.13.2 INSTALLATION
Tapes, Retainers, Shipping Plates
Ground Plate, Sponge Strip
Booklet Tray, Shift Tray
Docking
Height Adjustment
Power Cord, Breaker Switch Test
Auxiliary Trays
Check for Skew and Correct Side-to-Side Registration
1.13.3 PUNCH UNIT PU5020 NA, EU, SC (D449-17, -27, -28)
Accessories
1.13.4 INSTALLATION
1.14 TRIMMER UNIT TR5020 (D455-17)
1.14.1 ACCESSORIES
1.14.2 INSTALLATION
Tapes, Stopper Plate
Output Tray
Ground Plate
Preparing the Booklet Finisher (D434) for Docking
Docking
1.15 FINISHER SR5000 (B830)
1.15.1 ACCESSORIES
1.15.2 INSTALLATION
Preparing the Finisher
Docking
Check for Skew and Correct Side-to-Side Registration
1.15.3 PUNCH UNIT PU5000 NA, EU, SC (B831-01, -02, -03)
Accessories
Installation
1.16 KEY COUNTER
1.16.1 ACCESSORIES
1.16.2 INSTALLATION
Assembling
Installing
Attaching the Key Counter to the LCIT
User Tool and SP Mode Settings
1.17 OPTIONAL COUNTER I/F TYPE A (B870)
1.18 COMMON ADJUSTMENTS
1.18.1 HEIGHT AND LEVEL ADJUSTMENT
Before you begin:
Setting the Leveling Shoes
1.18.2 LCIT ADJUSTMENTS
1.18.3 SKEW AND SIDE-TO-SIDE REGISTRATION
Overview
Checking Side-to-Side Registration
Correcting Side-to-Side Registration
Detecting Paper Skew
Correcting Skew
1.18.4 BREAKER SWITCH TESTING
1.19 MFP OPTIONS
1.19.1 OVERVIEW
1.19.2 MERGING APPLICATIONS ON ONE SD CARD
Overview
Merging Applications
Undo Exec
1.19.3 COMMON PROCEDURES FOR MFP OPTIONS
Storing SD Application Cards on Site
Removing Slot Covers
1.19.4 PRINTER/SCANNER UNIT TYPE 1357 (D451-01)
Accessories
Installation
1.19.5 IEEE1284 INTERFACE BOARD TYPE A (B679-17)
Accessories
1.19.6 POSTSCRIPT3 UNIT TYPE 1357 (D451-05)
Accessories
Installation
1.19.7 DATA OVERWRITE SECURITY UNIT TYPE H (D377-06)
Accessories
Before You Begin
Seal Check and Removal
Installation
1.19.8 BROWSER UNIT TYPE E (D430-05)
Accessories
Installation
1.19.9 VM CARD TYPE J (D463-01)
Accessories
Installation
1.19.10 FILE FORMAT CONVERTER TYPE C (D377-04)
Accessories
Installation
1.19.11 IEEE802.11A/G INTERFACE UNIT TYPE J (377-01)
Accessories
SP Mode Settings for 802.11a/g Wireless LAN
1.19.12 BLUETOOTH INTERFACE UNIT TYPE 3245 (B826-17)
Accessories
Installation
1.19.13 GIGABIT ETHERNET TYPE B (D377-21)
Accessories
1.19.14 COPY DATA SECURITY UNIT TYPE F (B829-07)
Accessories
Installation
1.19.15 HDD ENCRYPTION UNIT TYPE A (D377-16)
Rev. 10/06/2009
Accessories
Before You Begin the Procedure
Seal Check and Removal
Installation Procedure
Recovery from a Device Problem
Restoring the encryption key
Clearing the NVRAM
1.19.16 IPDS UNIT TYPE 1357 EX (451-08)
Accessories:
Installation

PREVENTIVE MAINTENANCE
2. PREVENTIVE MAINTENANCE
2.1 PM PARTS
2.1.1 PM COUNTER
Displaying the PM Counter
PM Parts Screen Details
Number Button Submenu
Parts list for PM Yield Indicator
2.1.2 PM COUNTERS
Accessing the PM Counters
All PM Parts List
Parts List for PM Yield Indicator
Parts Exceeding Target Yield
Counter Clear for Parts Exceeding Target Yield
Clear All PM Settings
Counter List Print Out
2.2 PM TABLES: MAIN
2.2.1 MAIN MACHINE PM PARTS ADF
2.3 PM TABLES: OPTIONS
2.3.1 1. LCIT RT5030 (D452-17)
2.3.2 2. LCIT RT5040 (D453-17)
2.3.3 3. MULTI-BYPASS TRAY (B833)
2.3.4 4. UNIT DU5000 (D457-17)
2.3.5 5. PERFECT BINDER/INSERTER (D391)
Inserter Unit
Horizontal Paper Path
Signature Path
Stacking Tray
Main Grip Unit
Gluing Unit
Cover Registration Unit
Signature Rotation Unit
Trimming Unit
Other
2.3.6 6. COVER INTERPOSER TRAY CI5000 (B835)
2.3.7 7. MULTI-FOLDING UNIT FD5000 (D454)
2.3.8 8. RING BINDER (D392)
2.3.9 9. HIGH CAPACITY STACKER SK5010 (D447)
2.3.10 10. BOOKLET FINISHER SR5020 (D434)
Main
Punch Unit
Staplers
2.3.11 11. TRIMMER UNIT TR5020 (D455)
2.3.12 12. FINISHER SR5000 (B830)
Punch Unit PU5000 B831
2.3.13 LUBRICATION POINTS
Transfer
Fusing
REPLACEMENT AND ADJUSTMENT
3. REPLACEMENT AND ADJUSTMENT
3.1 GENERAL CAUTIONS
3.1.1 DRUM
3.1.2 DRUM UNIT
3.1.3 TRANSFER BELT UNIT
3.1.4 SCANNER UNIT
3.1.5 LASER UNIT
3.1.6 CHARGE CORONA
3.1.7 DEVELOPMENT
SM ix D059/D060/D061
3.1.8 CLEANING
3.1.9 FUSING UNIT
3.1.10 PAPER FEED
3.1.11 USED TONER
3.2 SPECIAL TOOLS AND LUBRICANTS
3.2.1 SPECIAL TOOLS
3.2.2 LUBRICANTS
3.3 COMMON PROCEDURES
3.3.1 DEVELOPMENT UNIT DRAWER
Pulling the Drawer Out
Closing the Drawer
3.3.2 FRONT DOORS
3.3.3 RIGHT COVERS
3.3.4 LEFT COVERS
3.3.5 CONTROLLER BOX
Opening the Controller Box
Removing the Controller Box Upper Cover
Removing the Controller Box
3.3.6 PSU BOX
Opening the PSU Box
Removing the PSU Box
3.3.7 REAR UPPER COVER
3.4 DOCUMENT FEEDER
3.4.1 ADF COVERS
3.4.2 ADF ORIGINAL TRAY
Original Tray
Original Table Cover
Bottom Plate
3.4.3 FEED UNIT AND SEPARATION ROLLER
3.4.4 FEED BELT
3.4.5 PICK-UP ROLLER
3.4.6 ADF SENSORS
Entrance Sensor and Length Sensor
Registration Sensor
Width Sensors
Exit Sensor, Inverter Sensor
3.4.7 TRANSPORT BELT
3.4.8 ADF MOTORS
Bottom Plate Motor, Pick-up Motor
Feed-in, Transport, Feed-out Motors
3.4.9 FEED-IN CLUTCH
3.5 SCANNER UNIT
3.5.1 EXPOSURE GLASS
3.5.2 LENS BLOCK
3.5.3 ORIGINAL SIZE SENSORS
3.5.4 EXPOSURE LAMPS
3.5.5 LAMP REGULATORS
3.5.6 OPTICS DUST FILTER
3.5.7 SCANNER HP SENSOR
3.5.8 SCANNER MOTOR
3.5.9 SCANNER DRIVE WIRES
Preparation
Front, Rear Scanner Drive Wires
Reinstallation
3.5.10 SIB
3.6 LASER UNIT
3.6.1 CAUTION DECALS
3.6.2 LD UNIT
3.6.3 POLYGON MIRROR MOTOR
3.6.4 LASER SYNCHRONIZATION DETECTOR
3.7 AROUND THE DRUM
3.7.1 CLEANING UNIT, PCU, DRUM
3.7.2 PTL (PRE-TRANSFER LAMP)
3.7.3 PRE-CHARGE UNIT
3.7.4 CHARGE CORONA UNIT
3.7.5 DRUM POTENTIAL SENSOR
3.7.6 PICK-OFF PAWLS
3.7.7 ID SENSOR
3.7.8 CLEANING BRUSH
3.7.9 CLEANING BLADES
3.7.10 CLEANING UNIT FILTERS
3.7.11 TONER FILTER
3.7.12 QUENCHING LAMP SHIELD GLASS
3.8 DEVELOPMENT AND TONER SUPPLY
3.8.1 DEVELOPMENT UNIT REMOVAL
3.8.2 TONER HOPPER REMOVAL
3.8.3 DEVELOPER REPLACEMENT
Initializing the Machine
3.8.4 CLEANING THE DOCTOR BLADE
3.8.5 DEVELOPMENT ENTRANCE, FRONT, REAR SIDE SEALS
3.8.6 TONER DENSITY SENSOR
3.8.7 TONER HOPPER SENSOR
3.8.8 TONER SUCTION BOTTLE
3.8.9 TONER SUCTION MOTOR
3.8.10 DEVELOPMENT MOTOR UNIT
3.8.11 TONER PUMP MOTOR, TONER PUMP MOTOR SENSOR
3.8.12 DEVELOPMENT ROLLER SHAFT CLEANING
3.9 TRANSFER BELT UNIT
3.9.1 TRANSFER BELT UNIT REMOVAL
3.9.2 TRANSFER BELT
3.9.3 TRANSFER BELT/BIAS ROLLER CLEANING BLADE
3.9.4 TRANSFER BELT BIAS BRUSH
3.10 PAPER FEED
3.10.1 PAPER TRAYS
Tandem Tray
Universal Tray
3.10.2 PAPER FEED ROLLERS
3.10.3 PAPER FEED UNITS 1, 2, 3
3.10.4 PAPER FEED, PAPER END, TRAY LIFT SENSOR
3.10.5 REAR FENCE RETURN SENSOR
3.10.6 REAR FENCE HP SENSOR
3.10.7 1ST TRAY RIGHT PAPER SENSOR
3.10.8 BOTTOM PLATE LIFT WIRE
3.10.9 PAPER DUST TRAY, REGISTRATION SENSOR,
DOUBLE-FEED SENSORS
3.10.10 LIFT MOTORS
1st Tray Lift Motor
2nd, 3rd Tray Lift Motors
D059/D060/D061 xii SM
3.10.11 2ND, 3RD TRAY SIZE SWITCHES
3.10.12 FEED MOTORS
Vertical Relay Motor
Feed Motor, Grip Motor
3.10.13 UPPER RELAY MOTOR
3.10.14 REGISTRATION MOTOR
3.10.15 DEVELOPMENT FAN MOTOR
3.10.16 REGISTRATION UNIT
3.10.17 LCT RELAY AND RELAY SENSORS
3.10.18 IMAGE POSITION SENSORS
Image position sensor unit (Tray)
Image position sensor unit (Duplex)
CIS Image Position Adjustment: LED Strength
CIS in the Duplex Unit
CIS Image Position Adjustment: Normal Paper
3.10.19 TANDEM FEED TRAY PAPER SIZE CHANGE
Setting the Paper Size for the Right Tandem Tray
Setting the Paper Size for the Left Tandem Tray
3.10.20 TANDEM TRAY SIDE REGISTRATION
3.11 FUSING UNIT
3.11.1 REMOVING THE FUSING UNIT
3.11.2 REINSTALLING THE FUSING UNIT
3.11.3 FUSING UNIT COVERS
3.11.4 FUSING CLEANING UNIT
Disassembling the Fusing Cleaning Unit
Fabric Pressure Roller
Reassembling the Fusing Cleaning Unit
3.11.5 HOT ROLLER UNIT
3.11.6 HOT ROLLER
Removing the Fusing Lamps
Disassembling the Hot Roller
Re-installing the Fusing Lamps
3.11.7 PRESSURE ROLLER
3.11.8 CLEANING ROLLER: PRESSURE ROLLER
3.11.9 HOT ROLLER STRIPPERS
3.11.10 PRESSURE ROLLER STRIPPER
3.11.11 FUSING EXIT SENSOR
3.11.12 FUSING UNIT THERMOSTATS, THERMISTOR
3.11.13 FUSING PRESSURE ADJUSTMENT
3.11.14 JOB TIME SENSOR
3.12 DUPLEX UNIT
3.12.1 DUPLEX UNIT
3.12.2 DUPLEX UNIT INNER COVER
3.12.3 DUPLEX INVERTER MOTOR
3.12.4 DUPLEX SWITCHBACK AND TRANSPORT MOTORS
3.12.5 DUPLEX ENTRANCE GUIDE UNIT
3.12.6 DUPLEX ENTRANCE SENSOR, INVERTER SENSOR
3.12.7 DUPLEX TRANSPORT SENSORS 1, 2, 3
3.12.8 INVERTER RELAY SENSOR
3.13 TONER BANK
3.13.1 TONER COLLECTION BOTTLE
3.13.2 TONER BANK UNIT
3.13.3 ACCESS TO INSIDE THE TONER BANK
3.14 BOARDS
3.14.1 MCU
3.14.2 OPU
3.14.3 IOB
IOB
IOB Unit
3.14.4 PSU-E (ENGINE): A, B
3.14.5 PPG, CGB POWER PACKS
3.14.6 AC DRIVE BOARD
3.14.7 CONTROLLER BOARD, NVRAM
Board Removal
NVRAM Replacement
3.14.8 BICU
3.14.9 HDD
3.14.10 PSU-C
3.14.11 URB
3.15 MOTORS
3.15.1 DRUM MOTOR
3.15.2 DUPLEX MOTOR
D059/D060/D061 xiv SM
3.15.3 FUSING MOTOR
3.15.4 EXIT MOTOR
3.16 OZONE FILTER
3.17 COPY IMAGE ADJUSTMENT: PRINTING/SCANNING
3.17.1 PRINTING
Registration – Leading Edge
Registration – Side-to-Side
Blank Margin
Magnification Adjustment
3.17.2 PARALLELOGRAM IMAGE ADJUSTMENT
3.17.3 SCANNING
Registration: Platen Mode
Magnification
3.17.4 ADF IMAGE ADJUSTMENT
Registration

TROUBLESHOOTING
4. TROUBLESHOOTING
4.1 PROGRAM DOWNLOAD
4.1.1 OVERVIEW
4.1.2 RECOVERY METHODS
4.1.3 DOWNLOAD ERROR CODES
4.2 SERVICE CALL CONDITIONS
4.2.1 SERVICE MODE LOCK/UNLOCK
4.2.2 SERVICE CALL LEVELS
4.2.3 SC CODE DESCRIPTIONS
4.3 SC TABLES: 1XX
4.4 SC TABLES: 2XX
4.5 SC TABLES: 3
4.6 SC TABLES: 4
4.7 SC TABLES: 5XX
4.8 SC TABLES: 6XX
4.9 SC TABLES: 7XX-1
4.10 SC TABLES: 7XX-2
4.11 SC TABLES: 7XX-3
4.12 SC TABLES: 7XX-4
SM xv D059/D060/D061
4.13 SC TABLES: 7XX-5
4.14 SC TABLES: 8XX
4.15 SC TABLES: 9XX
4.16 PSU PROTECTION CIRCUITS
4.16.1 OVERVIEW
4.16.2 AC INPUT MODULE
4.16.3 CONVERTER CONTROL MODULE
4.16.4 OUTPUT MODULE
4.16.5 PSU LED DISPLAY
4.16.6 PSU-E REPLACEMENT
4.17 TROUBLESHOOTING GUIDE
4.17.1 MAIN MACHINE (D059, D060, D061)
4.17.2 UNIT DU5000 (D457-17)
4.17.3 LCIT RT5030 (D452-17)
4.17.4 LCIT RT5040 (D453-17)
4.17.5 BOOKLET FINISHER SR5010 (D434-17)
4.17.6 HIGH CAPACITY STACKER SK5010 (D447-17)
4.17.7 MULTI FOLDING UNIT FD5000 (D454-17)
4.17.8 TRIMMER UNIT TR5020 (D455-17)
4.18 JAM DETECTION

SERVICE TABLES
5. SERVICE TABLES
5.1 SP TABLE KEY
5.1.1 BEFORE YOU BEGIN
Service Mode Lock/Unlock
Operators, Skilled Operators
5.1.2 SERVICE TABLE KEY
5.2 SYSTEM SP1-NNN FEED
5.3 SYSTEM SP2-NNN DRUM: 1
5.4 SYSTEM SP2-NNN DRUM: 2
5.5 SYSTEM SP3-NNN PROCESSING
5.6 SYSTEM SP4-NNN SCANNER
5.7 SYSTEM SP5-NNN MODE: 1
5.8 SYSTEM SP5-NNN MODE: 2
5.9 SYSTEM SP5-NNN MODE: 3
5.10 SP5-NNN MODE: 4
5.11 SYSTEM SP6-NNN PERIPHERALS: 1
5.12 SYSTEM SP6-NNN PERIPHERALS: 2
5.13 SYSTEM SP6-NNN PERIPHERALS: 3
5.14 SYSTEM SP6-NNN PERIPHERALS: 4
5.15 SYSTEM SP6-NNN PERIPHERALS: 5
5.16 SYSTEM SP7-NNN DATA LOGS: 1
5.17 SYSTEM SP7-NNN DATA LOGS: 2
5.18 SYSTEM SP7-NNN DATA LOGS: 3
5.19 SYSTEM SP8-NNN: DATA LOG2: 1
5.20 SP8-NNN: DATA LOG2: 2
5.21 PRINTER SP TABLES
5.22 SCANNER SP TABLES
5.23 USER SERVICE PROGRAM MODE TABLES
5.23.1 ADJUSTMENT SETTINGS FOR OPERATORS
5.23.2 ADJUSTMENT SETTINGS FOR SKILLED OPERATORS
5.24 INPUT CHECK
5.24.1 MAIN MACHINE INPUT CHECK: SP5803
5.24.2 ADF INPUT CHECK: SP6007
5.24.3 OTHER INPUT CHECKS
5.25 OUTPUT CHECKS
5.26 SPECIAL OPERATIONS
5.26.1 FIRMWARE UPDATE
Before You Begin
Updating Firmware
Updating Browser Firmware
Updating the LCDC for the Operation Panel
Downloading Stamp Data
Installing Another Language
Handling Firmware Update Errors
5.26.2 NVRAM DATA UPLOAD/DOWNLOAD
Uploading Content of NVRAM to an SD card
Downloading an SD Card to NVRAM
5.26.3 SMC LISTS
5.26.4 MEMORY ALL CLEAR: SP5801
5.26.5 SOFTWARE AND COPY SETTING RESET
Software Reset
Resetting the System
Resetting Copy/Document Server Features Only
Resetting Scanner Features Only
5.26.6 USING THE DEBUG LOG
Overview
Switching On and Setting Up Save Debug Log
Retrieving the Debug Log from the HDD
Recording Errors Manually
New Debug Log Codes
5.26.7 TOUCH SCREEN CALIBRATION

DETAILS
6. DETAILS
6.1 OVERVIEW
6.1.1 OVERALL MACHINE LAYOUT
6.1.2 PAPER PATH
6.1.3 COPY PROCESS
6.1.4 DRIVE LAYOUT
6.1.5 ELECTRICAL COMPONENT DESCRIPTIONS
Copier Engine
ADF
6.2 ADF
6.2.1 OVERVIEW
6.2.2 PICK-UP ROLLER RELEASE
6.2.3 BOTTOM PLATE LIFT
6.2.4 PICK-UP AND SEPARATION
6.2.5 ORIGINAL FEED
6.2.6 ORIGINAL SIZE DETECTION
Original Length
Original Width
Original Width Sensor Location
Detectable Paper Sizes
6.2.7 ORIGINAL TRANSPORT
6.2.8 ORIGINAL SKEW CORRECTION
D059/D060/D061 xviii SM
6.2.9 ORIGINAL INVERSION AND FEED-OUT
General Operation
Original Inversion
Original Exit (Single-Sided Original Mode)
Original Exit (Double-Sided Original Mode)
6.2.10 ADF JAM CONDITIONS
Feed-in
Feed-out
Inversion
6.2.11 SCANNING
Overview
6.2.12 SCANNER DRIVE
Magnification and Reduction
6.2.13 ORIGINAL SIZE DETECTION
6.2.14 AUTO IMAGE DENSITY (ADS)
6.3 BOARD STRUCTURE
6.3.1 BLOCK DIAGRAMS
IOB
BICU
Controller
6.3.2 COMPONENT DESCRIPTIONS
PCBs
6.4 IMAGE PROCESSING
6.4.1 IMAGE PROCESSING OVERVIEW
6.4.2 IMAGE PROCESSING FLOW
6.4.3 ADJUSTMENTS
Independent Dot Erase, Background Color Dropout
6.4.4 ORIGINAL TYPE SETTINGS
Manual Gamma Adjustment with SP4918
6.5 LASER EXPOSURE
6.5.1 OVERVIEW
6.5.2 LASER EXPOSURE MECHANISM
6.5.3 LD SAFETY SWITCHES
6.5.4 MULTI-BEAM LINE EXPOSURE
6.5.5 POLYGON MIRROR MOTOR
6.5.6 1200-DPI RESOLUTION
6.5.7 OPTICAL PATH
6.6 DRUM UNIT
6.6.1 OVERVIEW
6.6.2 DRUM DRIVE
6.6.3 DRUM CHARGE
Overview
Cleaning the Corona Wires
6.6.4 DRUM CLEANING
Overview
Main Cleaning Blade
2nd Cleaning Blade
Detecting the Status of the 2nd Cleaning Blade
SP 2930 Adjustments
Timing Sequence for Operation of the 2nd Cleaning Blade
Cleaning Unit Drive
Cleaning Blade Pressure and Side-to-Side Movement
6.6.5 AIR FLOW AROUND THE DRUM
6.6.6 DRUM PICK-OFF PAWLS
6.6.7 DRUM QUENCHING
6.6.8 PROCESS CONTROL
6.7 DEVELOPMENT
6.7.1 OVERVIEW
6.7.2 DEVELOPMENT MECHANISM
6.7.3 DRIVE
6.7.4 CROSS-MIXING
6.7.5 DEVELOPMENT BIAS
6.7.6 DEVELOPMENT UNIT TONER SUCTION
6.7.7 TONER HOPPER
Toner Supply
Toner Hopper Empty Detection
6.7.8 TONER DENSITY CONTROL
Overview
Toner Supply Timing
Sensor Control Mode
Image Pixel Count Control
6.8 TONER SUPPLY AND RECYCLING
D059/D060/D061 xx SM
6.8.1 OVERVIEW
6.8.2 TONER BANK
Toner Bottle Switching Mechanism
Toner Near-end, Toner End, Bottle Replacement
Toner Bottle Sensors
6.8.3 SUPPLYING TONER TO THE DEVELOPMENT UNIT
6.8.4 TONER RECYCLING AND TONER COLLECTION
Overview
Toner Recycling
Toner Collection Bottle
6.9 PAPER FEED
6.9.1 OVERVIEW
6.9.2 DRIVE
Layout
Tray Components (Example: 3rd Tray)
Vertical Paper Path
6.9.3 PAPER LIFT – TRAYS 2 & 3
6.9.4 PICK-UP AND FEED – TRAYS 1, 2, 3
Overview
Pick-up and Feed
Separation Roller Release
6.9.5 REMAINING PAPER/PAPER END DETECTION (TRAY 2, 3)
Remaining Paper Detection
End Detection
6.9.6 PAPER SIZE DETECTION
Tandem Tray (Tray 1)
Universal Cassettes (Tray 2, 3)
6.9.7 TRAY LOCK – TRAY 2, 3
6.9.8 TANDEM FEED – TRAY 1
Overview
Connecting the Left and Right Sides of the Tray
Paper Lift/Remaining Paper Detection: Tray 1
Feed and Lift: Tray 1
Side Fence Drive: Tray 1
Rear Fence Drive
Tray Positioning
SM xxi D059/D060/D061
6.9.9 VERTICAL TRANSPORT
6.9.10 LCT GUIDE PLATE
6.9.11 PAPER REGISTRATION
Overview
Registration Drive
Jam Removal at Paper Registration
6.9.12 IMAGE POSITION CORRECTION
6.9.13 DOUBLE-FEED DETECTION
6.9.14 ANTI-CONDENSATION HEATERS (OPTIONS)
6.10 IMAGE TRANSFER AND PAPER SEPARATION
6.10.1 OVERVIEW
6.10.2 IMAGE TRANSFER AND PAPER SEPARATION
6.10.3 TRANSFER BELT UNIT LIFT
6.10.4 PAPER TRANSPORTATION AND BELT DRIVE
6.10.5 TRANSFER BELT CLEANING
6.10.6 TONER COLLECTION
6.10.7 DRUM ANTI-CONDENSATION HEATER
6.11 FUSING
6.11.1 OVERVIEW
6.11.2 FUSING ENTRANCE GUIDE
6.11.3 FUSING UNIT DRIVE
6.11.4 FUSING LAMP AND FUSING TEMPERATURE CONTROL
Overview
Normal, High, and Low Temp Modes
Fusing Temperature Control and Machine Status – Overview
Fusing Temperature Control at Power On (Cold/Warm Starts)
Fusing Temperature Control During Standby and in Energy Saver
Mode
Fusing Temperature Control During Machine Operation
Fusing Temperature Control for Low Power Mode (During and
Immediately After)
Low Speed Mode (CPM Down)
6.11.5 FUSING CLEANING UNIT
Mechanism
Additional Notes about Fusing Cleaning Unit Operation
Calculating Cleaning Fabric Service Life
Fabric Near-End
6.11.6 PAPER COOLING
6.11.7 FUSING PRESSURE
6.11.8 HOT ROLLER STRIPPER RELEASE
6.12 PAPER EXIT/DUPLEX
6.12.1 OVERVIEW
Inversion/Duplex Components
Straight-Through Path (No Inversion, No Duplexing)
Inversion Path (Face-down Output, No Duplexing)
Inverting/Duplexing Path
6.12.2 INVERTER/DUPLEXING JUNCTION GATES
6.12.3 DUPLEX DRIVE MECHANISM
6.12.4 SWITCHBACK IDLE ROLLER OPERATION
6.12.5 PAPER EXIT MECHANISM
6.12.6 BASIC DUPLEX FEED OPERATION
Length up to A4/Letter LEF
Longer than A4/Letter LEF
6.13 BOARDS
6.13.1 LEDS
BCU
MCU
IOB
SIB
OPU
IPU
Controller Board
ADF Main Board LEDs
6.13.2 DIP SWITCHES
MCU
IOB
ADF Main Board
Controller Board
6.13.3 TEST POINTS
ADF Main Board
6.13.4 FUSES
ADF Main Board
6.13.5 VARIABLE RESISTORS
ADF Main Board
6.14 ENERGY CONSERVATION MODES
6.14.1 OVERVIEW
6.14.2 ENERGY SAVER MODE
6.14.3 LOW POWER MODE
6.14.4 OFF MODE
6.14.5 SLEEP MODE
SPECIFICATIONS
7. SPECIFICATIONS
7.1 SPECIFICATIONS: MAIN
7.1.1 MAIN MACHINE
Engine
ADF (B301)
7.2 SPECIFICATIONS: OPTIONS-1
7.2.1 A3/DLT TRAY KIT B331 (OPTION)
7.2.2 LCIT RT5030 (D452) (OPTION)
7.2.3 LCIT RT5040 (D453) (OPTION)
7.2.4 MULTI-BYPASS TRAY (B833) (OPTION)
7.2.5 DU5000 UNIT (D457) (OPTION)
General
Purge Tray
7.2.6 PERFECT BINDER D391
Cover Interposer (Inserter) D391
Perfect Binder (D391)
7.2.7 COVER INTERPOSER TRAY CI5010 (B835)
7.2.8 MUTLI-FOLDING UNIT FD5000 (D454)
General
Tray Capacity
7.2.9 RING BINDER RB5000 (D392)
7.3 SPECIFICATIONS: OPTIONS-2
7.3.1 HIGH CAPACITY STACKER SK5010 (D447)
General
Shift Tray
Proof Tray
7.3.2 BOOKLET FINISHER SR5020 (D434)
General
Shift Tray
Proof Tray
Corner Stapling
Booklet Stapling
Punch Unit PU5020 (D449) (Option)
7.3.3 TRIMMER UNIT TR5020 (D455) (OPTION)
7.3.4 FINISHER SR5000 (3K FINISHER B830)
Proof Tray
Shift Tray
Stapler
Punch Unit PU5000 (B831)

B830 FINISHER SR5000
SEE SECTION B830 FOR DETAILED TABLE OF CONTENTS

B833 MULTI BYPASS TRAY BY5000
SEE SECTION B833 FOR DETAILED TABLE OF CONTENTS

D434 BOOKLET FINISHER SR5020
SEE SECTION D434 FOR DETAILED TABLE OF CONTENTS

D447 HIGH CAPACITY STACKER SK5010
SEE SECTION D447 FOR DETAILED TABLE OF CONTENTS

D452 LCIT RT5030
SEE SECTION D452 FOR DETAILED TABLE OF CONTENTS

D453 LCIT RT5040
SEE SECTION D453 FOR DETAILED TABLE OF CONTENTS

D454 MULTI-FOLDING UNIT FD5000
SEE SECTION D454 FOR DETAILED TABLE OF CONTENTS

D455 TRIMMER UNIT TR5020
SEE SECTION D455 FOR DETAILED TABLE OF CONTENTS

D457 UNIT DU5000
SEE SECTION D457 FOR DETAILED TABLE OF CONTENTS

D391/D392 PERFECT BINDER GB5000/RING BINDER RB5000

D391 and D392 Service Manual not included in this book. It can be found on
RFG-eSource under Content ID number rfg033501

——————————

Content PARTS CATALOG:
D059/D060/D061 PARTS LOCATION AND LIST
Locations of Unit
1. Exterior 1 (D059/D060/D061)
2. Exterior 2 (D059/D060/D061)
3. Exterior 3 (D059/D060/D061)
4. Exterior 4 (D059/D060/D061)
5. Operation Panel 1 (D059/D060/D061)
6. Operation Panel 2 (D059/D060/D061)
7. Operation Panel 3 (D059/D060/D061)
8. Operation Panel 4 (D059/D060/D061)
9. ADF 1 (D059/D060/D061)
10. ADF 2 (D059/D060/D061)
11. ADF 3 (D059/D060/D061)
12. ADF 4 (D059/D060/D061)
13. ADF 5 (D059/D060/D061)
14. ADF 6 (D059/D060/D061)
15. ADF 7 (D059/D060/D061)
16. ADF 8 (D059/D060/D061)
17. ADF 9 (D059/D060/D061)
18. ADF 10 (D059/D060/D061)
19. Optics Section 1 (D059/D060/D061)
20. Optics Section 2 (D059/D060/D061)
21. Optics Section 3 (D059/D060/D061)
22. Optics Section 4 (D059/D060/D061)
23. Laser Unit (D059/D060/D061)
24. Tandem Tray 1 (D059/D060/D061)
25. Tandem Tray 2 (D059/D060/D061)
26. Tandem Tray 3 (D059/D060/D061)
27. Universal Tray (D059/D060/D061)
28. Paper Feed Unit 1 D059/D060/D061)
29. Paper Feed Unit 2 D059/D060/D061)
30. Paper Feed Unit 3 (D059/D060/D061)
31. Vertical Transport (D059/D060/D061)
32. Paper Registration 1 (D059/D060/D061)
33. Paper Registration 2 (D059/D060/D061)
34. Paper Registration 3 (D059/D060/D061)
35. Paper Registration 4 (D059/D060/D061)
36. Toner Bank Unit 1 (D059/D060/D061)
37. Toner Bank Unit 2 (D059/D060/D061)
38. Toner Bank Unit 3 (D059/D060/D061)
39. Toner Bank Unit 4 (D059/D060/D061)
40. Toner Hopper Section (D059/D060/D061)
41. Development Unit (D059/D060/D061)
42. Charge Unit (D059/D060/D061)
43. PCU 1 (D059/D060/D061)
44. PCU 2 (D059/D060/D061)
45. Cleaning Unit 1 (D059/D060/D061)
46. Cleaning Unit 2 (D059/D060/D061)
47. Discharge Unit (D059/D060/D061)
48. Transfer Belt Unit 1 (D059/D060/D061)
49. Transfer Belt Unit 2 (D059/D060/D061)
50. Fusing Unit 1 (D059/D060/D061)
51. Fusing Unit 2 (D059/D060/D061)
52. Fusing Unit 3 (D059/D060/D061)
53. Fusing Unit 4 (D059/D060/D061)
54. Paper Exit Section 1 (D059/D060/D061)
55. Paper Exit Section 2 (D059/D060/D061)
56. Paper Exit Section 3 (D059/D060/D061)
57. Paper Exit Section 4 (D059/D060/D061)
58. Duplex Unit 1 (D059/D060/D061)
59. Duplex Unit 2 (D059/D060/D061)
60. Duplex Unit 3 (D059/D060/D061)
61. Duplex Unit 4 (D059/D060/D061)
62. Duplex Unit 5 (D059/D060/D061)
63. Duplex Unit 6 (D059/D060/D061)
64. Used Toner Section (D059/D060/D061)
65. Drive Section 1 (D059/D060/D061)
66. Drive Section 2 (D059/D060/D061)
67. Drive Section 3 (D059/D060/D061)
68. Drive Section 4 (D059/D060/D061)
69. Drive Section 5 (D059/D060/D061)
70. Drive Section 6 (D059/D060/D061)
71. Drive Section 7 (D059/D060/D061)
72. Electrical Section 1 (D059/D060/D061)
73. Electrical Section 2 (D059/D060/D061)
74. Electrical Section 3 (D059/D060/D061)
75. Electrical Section 4 (D059/D060/D061)
76. Electrical Section 5 (D059/D060/D061)
77. Electrical Section 6 (D059/D060/D061)
78. Electrical Section 7 (D059/D060/D061)
79. Electrical Section 8 (D059/D060/D061)
80. Electrical Section 9 (D059/D060/D061)
81. Electrical Section 10 (D059/D060/D061)
82. Frame Section 1 (D059/D060/D061)
83. Frame Section 2 (D059/D060/D061)
84. Frame Section 3 (D059/D060/D061)
85. Frame Section 4 (D059/D060/D061)
86. Frame Section 5 (D059/D060/D061)
87. BCIU Board (D059/D060/D061)
88. IO Board (D059/D060/D061)
89. Controller Board (D059/D060/D061)
90. Decals and Documents (D059/D060/D061)
91. Special Tools (D059/D060/D061)

D059/D060/D061 PARTS INDEX
PARTS INDEX

COPY CONNECTOR TYPE 3260 B328-11 PARTS LOCATION AND LIST
1. Copy Connector (B32811)

COPY CONNECTOR TYPE 3260 B328-11 PARTS INDEX
PARTS INDEX

A3/11×17 TRAY UNIT TK5010 B331-14 PARTS LOCATION AND LIST
1. Paper Tray 1 (B331-14)
2. Paper Tray 2 (B331-14)

A3/11×17 TRAY UNIT TK5010 B331-14 PARTS INDEX
PARTS INDEX

CONTROLLER OPTIONS B679/B826/B829/D377/D430/D451/D463 PARTS LOCATION AND LIST
1. Controller Option

CONTROLLER OPTIONS B679/B826/B829/D377/D430/D451/D463 PARTS INDEX
PARTS INDEX

FINISHER SR5000 B830 PARTS LOCATION AND LIST
Location Of Unit
1. Exterior (B830)
2. Staple Tray 1 (B830)
3. Staple Tray 2 (B830)
4. Staple Tray 3 (B830)
5. Staple Tray 4 (B830)
6. Staple Tray 5 (B830)
7. Staple Tray 6 (B830)
8. Stapler Unit 1 (B830)
9. Stapler Unit 2 (B830)
10. Staple Transport 1 (B830)
11. Staple Transport 2 (B830)
12. Staple Transport 3 (B830)
13. Staple Transport 4 (B830)
14. Staple Transport 5 (B830)
15. Staple Transport 6 (B830)
16. Paper Exit Section 1 (B830)
17. Paper Exit Section 2 (B830)
18. Paper Exit Section 3 (B830)
19. Tray Drive Section 1 (B830)
20. Tray Drive Section 2 (B830)
21. Jogger Unit (B830)
22. Drive Section 1 (B830)
23. Drive Section 2 (B830)
24. Drive Section 3 (B830)
25. Electrical Section (B830)
26. Frame Section 1 (B830)
27. Frame Section 2 (B830)
28. Decal And Document (B830)

FINISHER SR5000 B830 PARTS INDEX
PARTS INDEX

PUNCH UNIT PU5000 B831 PARTS LOCATION AND LIST
1. Punch Unit (B831)

PUNCH UNIT PU5000 B831 PARTS INDEX
PARTS INDEX

MULTI BYPASS TRAY BY5000 B833 PARTS LOCATION AND LIST
1. Exterior (B833)
2. Original Tray 1 (B833)
3. Original Tray 2 (B833)
4. Original Feed 1 (B833)
5. Original Feed 2 (B833)
6. Original Transfer (B833)
7. Drive And Electrical (B833)
8. Frame Section (B833)

MULTI BYPASS TRAY BY5000 B833 PARTS INDEX
PARTS INDEX

COVER INTERPOSER TRAY CI5010 B835-57/66 PARTS
LOCATION AND LIST
1. Exterior (B835-57/66)
2. Original Tray 1 (B835-57/66)
3. Original Tray 2 (B835-57/66)
4. Original Feed 1 (B835-57/66)
5. Original Feed 2 (B835-57/66)
6. Original Feed 3 (B835-57/66)
7. Original Transfer 1 (B835-57/66)
8. Original Transfer 2 (B835-57/66)
9. Original Transfer 3 (B835-57/66)
10. Electrical And Drive 1 (B835-57/66)
11. Electrical And Drive 2 (B835-57/66)
12. Frame Section 1 (B835-57/66)
13. Frame Section 2 (B835-57/66)

COVER INTERPOSER TRAY CI5010 B835-57/66 PARTS INDEX
PARTS INDEX

PERFECT BINDER GB5000 D391 PARTS LOCATION AND LIST
1. Exterior 1 (D391)
2. Exterior 2 (D391)
3. Exterior 3 (D391)
4. Transit Pass Unit 1 (D391)
5. Transit Pass Unit 2 (D391)
6. Transit Pass Unit 3 (D391)
7. Inserter Section 1 (D391)
8. Inserter Section 2 (D391)
9. Inserter Section 3 (D391)
10. Inserter Section 4 (D391)
11. Inserter Section 5 (D391)
12. Inserter Section 6 (D391)
13. Inserter Section 7 (D391)
14. Inserter Section 8 (D391)
15. Inserter Section 9 (D391)
16. Inserter Section 10 (D391)
17. Inserter Section 11 (D391)
18. Inserter Section 12 (D391)
19. Inserter Section 13 (D391)
20. Vertical Feed Section 1 (D391)
21. Vertical Feed Section 2 (D391)
22. Signature Transport Section 1 (D391)
23. Signature Transport Section 2 (D391)
24. Signature Transport Section 3 (D391)
25. Signature Transport Section 4 (D391)
26. Signature Transport Section 5 (D391)
27. Signature Delivery Section 1 (D391)
28. Signature Delivery Section 2 (D391)
29. Signature Delivery Section 3 (D391)
30. Signature Delivery Section 4 (D391)
31. Signature Delivery Section 5 (D391)
32. Stacking Tray Section 1 (D391)
33. Stacking Tray Section 2 (D391)
34. Stacking Tray Section 3 (D391)
35. Stacking Tray Section 4 (D391)
36. Stacking Tray Section 5 (D391)
37. Stacking Tray Section 6 (D391)
38. Sub Gripper Section 1 (D391)
39. Sub Gripper Section 2 (D391)
40. Sub Gripper Section 3 (D391)
41. Sub Gripper Section 4 (D391)
42. Sub Gripper Section 5 (D391)
43. Main Gripper Section 1 (D391)
44. Main Gripper Section 2 (D391)
45. Main Gripper Section 3 (D391)
46. Main Gripper Section 4 (D391)
47. Main Gripper Section 5 (D391)
48. Glue Supply Section 1 (D391)
49. Glue Supply Section 2 (D391)
50. Glue Supply Section 3 (D391)
51. Glue Supply Section 4 (D391)
52. Gluing Section 1 (D391)
53. Gluing Section 2 (D391)
54. Gluing Section 3 (D391)
55. Cover Feed Regist Section 1 (D391)
56. Cover Feed Regist Section 2 (D391)
57. Cover Feed Path Section 1 (D391)
58. Cover Feed Path Section 2 (D391)
59. Cover Feed Path Section 3 (D391)
60. Cover Feed Path Section 4 (D391)
61. Cover Feed Path Section 5 (D391)
62. Cover Feed Path Section 6 (D391)
63. Cover Feed Path Section 7 (D391)
64. Cover Feed Path Section 8 (D391)
65. Cover Feed Path Section 9 (D391)
66. Cover Feed Path Section 10 (D391)
67. Cover Feed Path Section 11 (D391)
68. Rear Folder Section 1 (D391)
69. Rear Folder Section 2 (D391)
70. Rear Folder Section 3 (D391)
71. Rear Folder Section 4 (D391)
72. Bundle Feed Section 1 (D391)
73. Bundle Feed Section 2 (D391)
74. Bundle Feed Section 3 (D391)
75. Bundle Feed Section 4 (D391)
76. Stack Rotation Section 1 (D391)
77. Stack Rotation Section 2 (D391)
78. Stack Rotation Section 3 (D391)
79. Stack Rotation Section 4 (D391)
80. Stack Rotation Section 5 (D391)
81. Stack Rotation Section 6 (D391)
82. Trimming Section 1 (D391)
83. Waste Paper Case Section 1 (D391)
84. Waste Paper Case Section 2 (D391)
85. Waste Paper Case Section 3 (D391)
86. Waste Paper Case Section 4 (D391)
87. Book Stacking Section 1 (D391)
88. Book Stacking Section 2 (D391)
89. Book Stacking Section 3 (D391)
90. Book Stacking Section 4 (D391)
91. Book Stacking Section 5 (D391)
92. Electrical Section 1 (D391)
93. Electrical Section 2 (D391)

PERFECT BINDER GB5000 D391 PARTS INDEX
PARTS INDEX

RING BINDER RB5000 D392 PARTS LOCATION AND LIST
1. Exterior 1 (D392)
2. Exterior 2 (D392)
3. Paper Feed Section 1 (D392)
4. Paper Feed Section 2 (D392)
5. Paper Feed Section 3 (D392)
6. Side Jogger Unit (D392)
7. Punch Unit 1 (D392)
8. Punch Unit 2 (D392)
9. Ring Binder Unit 1 (D392)
10. Ring Binder Unit 2 (D392)
11. Ring Binder Unit 3 (D392)
12. Ring Binder Unit 4 (D392)
13. Ring Binder Unit 5 (D392)
14. Ring Binder Unit 6 (D392)
15. Paper Exit Section 1 (D392)
16. Paper Exit Section 2 (D392)
17. Paper Exit Section 3 (D392)
18. Paper Exit Section 4 (D392)
19. Stacker Section 1 (D392)
20. Stacker Section 2 (D392)
21. Stacker Section 3 (D392)
22. Stacker Section 4 (D392)
23. Drive Section 1 (D392)
24. Drive Section 2 (D392)
25. Drive Section 3 (D392)
26. Electrical Section 1 (D392)
27. Electrical Section 2 (D392)
28. Frame Section (D392)

RING BINDER RB5000 D392 PARTS INDEX
PARTS INDEX

BOOKLET FINISHER SR5020 D434 PARTS LOCATION AND LIST
1. Exterior 1 (D434)
2. Exterior 2 (D434)
3. Paper Transfer:Entrance 1 (D434)
4. Paper Transfer:Entrance 2 (D434)
5. Paper Transfer:Proof Tray 1 (D434)
6. Paper Transfer:Proof Tray 2 (D434)
7. Paper Transfer:Proof Tray 3 (D434)
8. Paper Transfer:Staple 1 (D434)
9. Paper Transfer:Staple 2 (D434)
10. Paper Transfer:Staple 3 (D434)
11. Staple Unit 1 (D434)
12. Staple Unit 2 (D434)
13. Staple Unit 3 (D434)
14. Staple Unit 4 (D434)
15. Staple Unit 5 (D434)
16. Staple Unit 6 (D434)
17. Staple Unit 7 (D434)
18. Staple Unit 8 (D434)
19. Staple Unit 9 (D434)
20. Staple Unit 10 (D434)
21. Staple Unit 11 (D434)
22. Staple Unit 12 (D434)
23. Booklet Unit 1 (D434)
24. Booklet Unit 2 (D434)
25. Booklet Unit 3 (D434)
26. Booklet Unit 4 (D434)
27. Booklet Unit 5 (D434)
28. Paper Exit Section 1 (D434)
29. Paper Exit Section 2 (D434)
30. Paper Exit Section 3 (D434)
31. Shift Tray 1 (D434)
32. Shift Tray 2 (D434)
33. Shift Tray 3 (D434)
34. Jogger Section (D434)
35. Drive Section (D434)
36. Electrical Section (D434)
37. Frame Section (D434)

BOOKLET FINISHER SR5020 D434 PARTS INDEX
PARTS INDEX

HIGH CAPACITY STACKER SK5010 D447 PARTS LOCATION AND LIST
1. Exterior 1 (D447)
2. Exterior 2 (D447)
3. Exterior 3 (D447)
4. Paper Transfer 1 (D447)
5. Paper Transfer 2 (D447)
6. Proof Tray Exit Section (D447)
7. Transport (D447)
8. Paper Exit Section (D447)
9. Paper Tray Exit Section (D447)
10. Jogger Section 1 (D447)
11. Jogger Section 2 (D447)
12. Jogger Section 3 (D447)
13. Jogger Section 4 (D447)
14. Paper Tray Drive Section (D447)
15. Paper Cart Section (D447)
16. Drive Section 1 (D447)
17. Drive Section 2 (D447)
18. Drive Section 3 (D447)
19. Electrical Section 1 (D447)
20. Electrical Section 2 (D447)
21. Electrical Section 3 (D447)
22. Frame Section (D447)

HIGH CAPACITY STACKER SK5010 D447 PARTS INDEX
PARTS INDEX

PUNCH UNIT PU5020 D449 PARTS LOCATION AND LIST
1. Punch Unit 1 (D449)
2. Punch Unit 2 (D449)

PUNCH UNIT PU5020 D449 PARTS INDEX
PARTS INDEX

LCIT RT5030 D452 PARTS LOCATION AND LIST
1. Exterior 1 (D452)
2. Exterior 2 (D452)
3. Tray 4/5 Unit 1 (D452)
4. Tray 4/5 Unit 2 (D452)
5. Tray 4/5 Unit 3 (D452)
6. Tray 6 Unit 1 (D452)
7. Tray 6 Unit 2 (D452)
8. Tray 6 Unit 3 (D452)
9. Paper Feed Unit 1 (D452)
10. Paper Feed Unit 2 (D452)
11. Paper Feed Unit 3 (D452)
12. Paper Transfer 1 (D452)
13. Paper Transfer 2 (D452)
14. Paper Transfer 3 (D452)
15. Paper Transfer 4 (D452)
16. Drive Section (D452)
17. Electrical Section 1 (D452)
18. Electrical Section 2 (D452)
19. Frame Section 1 (D452)
20. Frame Section 2 (D452)

LCIT RT5030 D452 PARTS INDEX
PARTS INDEX

LCIT RT5040 D453 PARTS LOCATION AND LIST
1. Exterior (D453)
2. Tray 4/6 Unit 1 (D453)
3. Tray 4/6 Unit 2 (D453)
4. Tray 4/6 Unit 3 (D453)
5. Tray 4/6 Unit 4 (D453)
6. Tray 4/6 Unit 5 (D453)
7. Tray 4/6 Unit 6 (D453)
8. Tray 4/6 Unit 7 (D453)
9. Tray 5 Unit 1 (D453)
10. Tray 5 Unit 2 (D453)
11. Tray 5 Unit 3 (D453)
12. Tray 5 Unit 4 (D453)
13. Tray 5 Unit 5 (D453)
14. Tray 5 Unit 6 (D453)
15. Tray 5 Unit 7 (D453)
16. Tray 5 Unit 8 (D453)
17. Paper Feed Unit 1 (D453)
18. Paper Feed Unit 2 (D453)
19. Paper Feed Unit 3 (D453)
20. Paper Transfer 1 (D453)
21. Paper Transfer 2 (D453)
22. Paper Transfer 3 (D453)
23. Paper Transfer 4 (D453)
24. Paper Transfer 5 (D453)
25. Paper Transfer 6 (D453)
26. Drive Section 1 (D453)
27. Drive Section 2 (D453)
28. Electrical Section (D453)
29. Frame Section 1 (D453)
30. Frame Section 2 (D453)

LCIT RT5040 D453 PARTS INDEX
PARTS INDEX

MULTI-FOLDING UNIT FD5000 D454 PARTS LOCATION AND LIST
1. Exterior 1 (D454)
2. Exterior 2 (D454)
3. Paper Transfer:Entrance (D454)
4. Paper Transfer 1 (D454)
5. Paper Transfer 2 (D454)
6. Paper Transfer 3 (D454)
7. Fold Unit 1 (D454)
8. Fold Unit 2 (D454)
9. Fold Unit 3 (D454)
10. Fold Unit 4 (D454)
11. Fold Unit 5 (D454)
12. Fold Unit 6 (D454)
13. Fold Unit 7 (D454)
14. Fold Unit 8 (D454)
15. Fold Unit 9 (D454)
16. Fold Unit 10 (D454)
17. Fold Unit 11 (D454)
18. Fold Unit 12 (D454)
19. Fold Unit 13 (D454)
20. Fold Unit 14 (D454)
21. Fold Unit 15 (D454)
22. Fold Unit 16 (D454)
23. Fold Unit 17 (D454)
24. Fold Unit 18 (D454)
25. Fold Unit 19 (D454)
26. Fold Unit 20 (D454)
27. Fold Unit 21 (D454)
28. Fold Unit 22 (D454)
29. Paper Exit Section 1 (D454)
30. Paper Exit Section 2 (D454)
31. Paper Exit Section 3 (D454)
32. Drive Section (D454)
33. Electrical Section (D454)
34. Frame Section (D454)

MULTI-FOLDING UNIT FD5000 D454 PARTS INDEX
PARTS INDEX

TRIMMER UNIT TR5020 D455 PARTS LOCATION AND LIST
1. Exterior (D455)
2. Paper Feed Unit 1 (D455)
3. Paper Feed Unit 2 (D455)
4. Paper Feed Unit 3 (D455)
5. Paper Feed Unit 4 (D455)
6. Jogger Section 1 (D455)
7. Jogger Section 2 (D455)
8. Jogger Section 3 (D455)
9. Jogger Section 4 (D455)
10. Jogger Section 5 (D455)
11. Cutter Section (D455)
12. Paper Exit Section 1 (D455)
13. Paper Exit Section 2 (D455)
14. Tray Section 1 (D455)
15. Tray Section 2 (D455)

Number of pages: 2737.