Xerox Color J75 Press Color C75 Press Service Manual and Parts Catalog


Accurate, clear and concise text, combined with detailed illustrations, lists of error code, instruction and diagrams, guide you through procedure of repair, remediate, maintenance and adjustments your copier, printer or scanner.
Present service manual and parts catalog Xerox Color J75 Press Color C75 Press contain clear instructions and procedures on how to fix the problems occurring in your equipment.
The information contained in this repair manual is necessary for the repair, but also prevention, resulting in a longer life of your equipment.
Format of the manual: PDF, makes it easy to navigate, instant download and print. English language.
To see what contain, please read table of contents:

0) PREFACE
0.1 Getting to know this Service Manual
0.2 How to use the Service Manual
0.3 Description for Terminology And Symbols

1) SERVICE CALL PROCEDURE
1.1 Before Starting the Servicing
1.2 Service Call Procedure
1.3 Detailed Contents of the Service Call
1.4 TRIM Check List
1.5 Periodic Replacement Parts

2) TROUBLESHOOTING

3) IMAGE QUALITY TROUBLESHOOTING
3.1 Preface
3.1.1 Contents of Chapter 3
3.1.2 Using Image Quality Troubleshooting
3.2 IOT-related Image Quality Troubleshooting
3.2.1 IOT Image Quality Entry FIP
IQ-1 IOT Image Quality Entry FIP
IQ-2 FIP for periodical spots, streaks, bands, and etc
IQ-3 FIP for overall light printing
IQ-4 FIP when a particular color is light
IQ-5 FIP for blank print
IQ-6 FIP for solid black print
IQ-7 FIP for solid color print
IQ-8 FIP for vertical blank areas
IQ-9 FIP for vertical off-color areas
IQ-10 FIP for horizontal blank areas
IQ-11 FIP for horizontal off-color areas
IQ-12 FIP for vertical streaks
IQ-13 FIP for horizontal streaks
IQ-14 FIP for partial image omission
IQ-15 FIP for spots
IQ-16 FIP for ghost images
IQ-17 FIP for background
IQ-18 FIP for skewed images
IQ-19 FIP for paper crease
IQ-20 FIP for unfused images
IQ-21 Mottle RAP
IQ-22 2nd BTR Inspection RAP
IQ-23 1st BTR Inspection RAP
IQ-24 Developer Bias RAP
IQ-25 BCR Inspection RAP
IQ-26 Scorotron Inspection RAP
IQ-27 Scorotron Cleaner RAP
IQ-28 Color Registration Error RAP
3.3 IPS-related Image Quality Troubleshooting
3.3.1 IPS Image Quality Entry FIP
CQ-01 Background Suppression Adjustment
CQ-02 Density Adjustment: Light Ink Support
CQ-03-1 Density Adjustment: Darkening the Highlight
CQ-03-2 Density Adjustment: Lightening
CQ-04 Bleed on Tracing Paper
CQ-05 Dual Color Copy Able1401a System Reproducibility
CQ-06 Gradation Jump in 100-lines Photo Document
CQ-07 Scan: Smeared Text, Mosquito Noise Around Text
CQ-09 Bleed on 2 Sided Document
CQ-10 Platen Background
CQ-11 Color Balance Adjustment
CQ-12 Rough Thin Lines
CQ-21 Image Quality Difference between Side 1 and Side 2 (Sharpness Adjustment of Side 1 and Side 2)
CQ-22 Image Quality Difference between Side 1 and Side 2 (Color Balance Adjustment of Side 1 and Side 2)
CQ-23 Image Quality Difference between Side 1 and Side 2 (Photo & Text Recognition Adjustment of Side 1 and Side 2)
CQ-24 Image Quality Difference between Side 1 and Side 2 (Background Suppression Adjustment of Side 1 and Side 2)
CQ-25 Image Quality Difference between Side 1 and Side 2 (Color Adjustment of Side 1 and Side 2)
3.4 NG Image Samples (IDS)
3.4.1 NG Image Samples (IDS)
IDS1a Total chart sample where power is not supplied to the Y BCR (Vh = 0V)
IDS2a Total chart sample where power is not supplied to the M BCR (Vh = 0V)
IDS3a Total chart sample where power is not supplied to the C BCR (Vh = 0V)
IDS4a CC Grid float (Vg = 0) status (Halftone sample)
IDS5a K color halftone sample where CC has no output (Vg = 0)
IDS6a Deve Bias float status
IDS7a Deve Bias earthed status
IDS8a 1st BTR (Cyan) float status
IDS9a 1st BTR (Black) float status
IDS10a 1st BTR (YMCK) float status
IDS11a 2nd BTR float status
IDS12a C2 paper sample when not in Fusing Unit Nip state (poor fusing sample)
IDS13a JD paper sample when not in Fusing Unit Nip state (poor fusing sample)
IDS1b Image Quality Specification
IDS2b Image Errors
IDS3b Background
IDS4b Color Registration Error
IDS5b Blanks Around Leftover Toner
IDS6b Blanks
IDS7b Frequently Appearing Bands
IDS8b Irregular Streaks in Process Direction
IDS9b Light Image
IDS10b Moire
IDS11b Mottles
IDS12b Newton Ring
IDS13b Periodical (Repetitively Occurring) Bands, Streaks, Spots, and Smear
IDS14b Ghost Image
IDS15b Streak-shaped Blanks in Process Direction
IDS16b Wrinkled Image
IDS17b Cloud-shaped Error
IDS18b Streaks due to IBT Cleaner
IDS19b Streaks due to Scorotron
IDS20b Bands due to Scorotron Cleaner

4) DISASSEMBLY/ASSEMBLY AND ADJUSTMENT
4.1 Preface
4.1 Preface
4.2 Disassembly/Assembly
1. IIT/UI
REP 1.2.1 Opening/Closing of IIT Frame
REP 1.3.1 Platen Glass
REP 1.4.1 IIT Registration Sensor
REP 1.4.2 Platen Angle Sensor
REP 1.4.3 Lens and CCD
REP 1.4.4 CCD Fan
REP 1.4.5 (SCC) IIT PWB
REP 1.5.1 (SCC) Carriage Motor
REP 1.5.2 Carriage Cable
REP 1.5.3 Full Rate Carriage
REP 1.6.1 LED Lamp
REP 1.6.2 PS LED PWB
2. ROS
REP 2.1.1 (SCC) ROS Assembly (C, K)
REP 2.1.2 (SCC) ROS Assembly (Y, M)
3. DRIVE
REP 3.1.1 Main Drive Assembly
REP 3.1.2 DEVE Drive Assembly (K)
REP 3.1.3 (SCC) Drum Motor Assembly (K)
REP 3.1.4 Fusing Unit Drive Assembly
REP 3.2.1 DEVE Drive Assembly (Y, M, C)
6. XFER
REP 6.3.1 IBT Belt Assembly
REP 6.3.2 IBT Belt Cleaner Assembly
REP 6.3.3 IBT Belt
REP 6.9.1 2nd BTR Roll
REP 6.9.2 Cleaning Blade
7. Fusing Unit, Decurler
REP 7.1.1 Block
REP 7.1.2 (SCC) Fusing Unit
REP 7.1.3 Decurler Transport Assembly
REP 7.5.1 Heat Roll
REP 7.5.2 Belt Assembly
8. XERO, DEVE
REP 8.1.1 Drum Cartridge
REP 8.2.1 Dispenser Assembly
REP 8.6.1 Rail Assembly
REP 8.6.2 Developer Housing (K)
REP 8.6.3 Developer (Y)
REP 8.9.1 Cleaning Motor Assembly
11. TRAY MODULE
REP 11.1.1 Tray 1/2/3 Assembly
REP 11.1.2 (SCC) Tray 1/2/3 Feeder Assembly
REP 11.2.1 Pinch Roll Assembly 1
REP 11.2.2 Pinch Roll Assembly 2
REP 11.2.3 Pinch Roll Assembly 3
REP 11.3.1 Takeaway Roll 1
REP 11.4.1 (SCC) Takeaway Motor Assembly
REP 11.7.1 Feed/Nudger/Retard Roll (Tray 1/2/3)
13. MSI
REP 13.1.1 MSI
REP 13.3.1 MSI Feeder
REP 13.6.1 Retard Roll
REP 13.6.2 Feed Roll
REP 13.6.3 Nudger Roll
REP 13.7.1 Feed/Nudger Shaft
14. REGI, DUP, V-TRA, Decurler Drive
REP 14.1.1 Registration Transport Assembly
REP 14.1.2 2nd BTR Roll Assembly
REP 14.1.3 Inverter Transport Assembly
REP 14.1.4 V-Transport Assembly
REP 14.1.5 Drawer Unit
REP 14.2.1 Drawer Rail
REP 14.3.1 Duplex Motor Assembly
REP 14.4.1 Duplex Transport Drive Belt
REP 14.8.1 Transport Belt
15. REGISTRATION
REP 15.1.1 MSI Chute Assembly
16. INVERTER
REP 16.1.1 Inverter Chute Assembly
18. Electrical
REP 18.1.1 Opening/Closing the IOT PWB Chassis Unit
REP 18.2.1 (SCC) MCU PWB and (SCC) (ISC) NVM PWB
REP 18.2.2 (SCC) BP PWB Assembly
REP 18.3.1 MOB ADC Assembly
REP 18.4.1 (SCC) HVPS (PR12)
REP 18.4.2 (SCC) PH Drive PWB
REP 18.5.1 (SCC) LVPS Assembly (N10)
REP 18.5.2 (SCC) AC Power Supply Unit
35. ESS
REP 35.1.1 Control Unit
REP 35.2.1 (SCC) ESS PWB
REP 35.2.2 (SCC) Artemis PWB Assembly
REP 35.2.3 (SCC) 1P DUP PWB
37. I/F Module (Color C75 Press)
REP 37.1.1 Detaching the I/F Module
REP 37.1.2 Inner Cover
REP 37.2.1 IFM Front Door Interlock Switch
REP 37.2.2 (SCC) IFM PWB
REP 37.3.1 Decurler Motor Belt
REP 37.3.2 Exit Motor Belt
REP 37.4.1 Trans Roll Assembly
REP 37.4.2 Exit Roll Assembly
REP 37.4.3 Feed/Entrans Belt
REP 37.5.1 Decurler Belt Upper/Lower
REP 37.5.2 Decurler Drive Belt
REP 37.6.1 Inlet Chute Upper/Lower
REP 37.6.2 Cam Shaft
REP 37.7.1 Gate Assembly
REP 37.7.2 Decurler Gate Sensor
REP 37.8.1 Guide Assembly Low-563/MID-U/MID-Low
REP 37.8.2 Guide Assembly-Exit Up
38. I/F Cooling Module (Color J75 Press)
REP 38.1.1 Detaching the I/F Cooling Module
REP 38.1.2 Inner Cover
REP 38.2.1 ICM Front Door Interlock Switch
REP 38.2.2 (SCC) ICM PWB
REP 38.3.1 Decurler Motor Belt
REP 38.3.2 Exit Motor Belt
REP 38.4.1 Trans Roll Assembly (Upper)
REP 38.4.2 Trans Roll Assembly (Lower)
REP 38.4.3 Exit Roll Assembly
REP 38.4.4 Entrance Belt
REP 38.4.5 Feed Belt
REP 38.5.1 Decurler Belt Upper/Lower
REP 38.5.2 Decurler Drive Belt
REP 38.6.1 Inlet Chute Upper/Lower
REP 38.6.2 Cam Shaft
REP 38.7.1 Gate Assembly
REP 38.7.2 Decurler Gate Sensor
REP 38.8.1 Guide Assembly MID-Low
REP 38.8.2 Guide Assembly-Exit Up
REP 38.8.3 Guide Assembly Low – AMIATA
REP 38.8.4 Guide Assembly – ILS
REP 38.8.5 Guide Upper – AMIATA
REP 38.12.1 Fan 4
REP 38.13.1 ILS (Inline Sensor)
39. HCS
REP 39.1.1 Detaching the HCS
REP 39.1.2 Rear Cover
REP 39.2.1 Top Cover
REP 39.4.1 Upper Cover
REP 39.5.1 HCS Transport Motor 1
REP 39.5.2 Top Tray Roll 1
REP 39.6.1 Transport Clutch and Belt
REP 39.7.1 HCS Transport Motor 2
REP 39.8.1 Bypass Clutch 1, Bypass Clutch 2 and Belt
REP 39.9.1 Top Tray Motor
REP 39.12.1 Bypass Clutch 3 and Belt
REP 39.23.1 Gate Solenoid 1 and Gate 1
REP 39.24.1 Stacker Paddle Clutch
REP 39.24.2 Paddle
REP 39.25.1 Stacker Exit Roll Housing
REP 39.25.2 Edge Sensor Frame
REP 39.28.1 Tamper Unit
REP 39.29.1 Front Tamper Motor, Belt and Pulley Bracket
REP 39.32.1 Set Clamp Motor and Belt
REP 39.33.1 Rear Tamper Motor, Belt and Pulley Bracket
REP 39.37.1 (SCC) HCS Drive PWB
REP 39.37.2 (SCC) HCS PWB
REP 39.37.3 (SCC) HCS LVPS
REP 39.39.1 Left Stacker Belt
REP 39.40.1 Right Stacker Belt
REP 39.42.1 (SCC) HCS Control Panel PWB
54. DADF-250 (Color)
REP 54.1.1 DADF
REP 54.1.2 Service Position
REP 54.2.1 CIS
REP 54.2.2 (SCC) DCDC PWB
REP 54.3.1 Left/Right Counter Balance
REP 54.3.2 (SCC) DADF PWB
REP 54.6.1 (SCC) DADF Feed Clutch
REP 54.6.2 Feed Motor Belt
REP 54.7.1 Takeaway Roll
REP 54.7.2 Rail
REP 54.7.3 Pre Regi Motor Belt
REP 54.7.4 Baffle Solenoid Assembly
REP 54.8.1 Regi Motor Belt
REP 54.8.2 DADF Lead Regi Sensor
REP 54.8.3 Regi Roll
REP 54.9.1 Platen Motor Belt
REP 54.9.2 Out Roll
REP 54.10.1 Exit 1 Roll
REP 54.10.2 Exit Motor Belt
REP 54.18.1 Feeder Roll
REP 54.18.2 Nudger Roll
REP 54.20.1 Tension Spring
REP 54.21.1 Retard Roll
REP 54.22.1 DADF Out Sensor
REP 54.23.1 DADF Exit Sensor
REP 54.25.1 DADF Regi Sensor
REP 54.25.2 Tension Spring
99. (SCC) Safety Critical Components
REP 99.1.1 (SCC) Safety Critical Components
4.3 Adjustment
1. IIT/UI
ADJ 1.1.1 Full/Half Rate Carriage Position Adjustment
ADJ 1.1.2 IIT Lead Edge Registration
ADJ 1.1.3 IIT Side Registration
ADJ 1.1.4 IIT Vertical/Horizontal Reduce/Enlarge
ADJ 1.1.5 DC945 IIT Calibration
ADJ 1.1.6 2 Sided Color Scanning Calibration
7. Fusing Unit, Decurler
ADJ 7.5.1 Fusing Unit Paper Width Settings (for APO/GCO)
18. Electrical
ADJ 18.1.1 DC126 System Registration Adjustment (Registration)
ADJ 18.1.2 DC127 Register Paper Feeding Positions (Registration)
ADJ 18.1.3 DC671 Registration Measuring Cycle (Registration)
ADJ 18.1.4 DC673 Registration Control Sensor Check Cycle (Registration)
ADJ 18.1.5 DC675 Registration Control Setup Cycle (Registration)
ADJ 18.1.6 DC740 Tray 5 Guide Adjustment (Registration)
ADJ 18.1.7 MAX Setup
ADJ 18.1.8 DC919 Color Balance Adjustment (MAX Setup)
ADJ 18.1.9 DC924 TRC Adjustment (MAX Setup)
ADJ 18.1.10 DC931 In/Out Manual Setup (MAX Setup)
ADJ 18.1.11 DC938 Procon On / Off Print (MAX Setup)
ADJ 18.1.12 DC950 ATC Sensor Setup (MAX Setup)
ADJ 18.1.13 DC956 Belt Edge Learn (Sub System)
ADJ 18.1.14 DC991 Adjust Toner Density (MAX Setup)
ADJ 18.1.15 UI Touch Panel Origin Point Correction
ADJ 18.1.16 Firmware Version Upgrade
ADJ 18.1.17 Things to Take Note when Replacing Important Information Stored Components242
ADJ 18.2.1 Firmware Version Upgrade (Firmware Update Service System)
ADJ 18.2.2 Backup/Restore (Recovery)/Reproduce
ADJ 18.2.3 [DMP-x] Special Booting
ADJ 18.2.4 Settings Recovery Tool (Freeware)
ADJ 18.3.1 DC751 IOT CIS Check Cycle
ADJ 18.3.2 DC750 IOT CIS Setup Cycle
39. HCS
ADJ 39.39.1 Left/Right Tray Arm Installation Position
54. DADF-250 (Color)
ADJ 54.1.1 DADF Lead Skew Adjustment
ADJ 54.1.2 DADF Side Edge Registration
ADJ 54.1.3 DADF Lead Edge Registration
ADJ 54.1.4 DADF Height Adjustment
ADJ 54.1.5 DADF Tail Edge Regi Registration Adjustment
ADJ 54.1.6 DADF Slow Scan Direction Reduce / Enlarge Adjustment

5) PARTS LIST
5.1 Preface
5.1.1 How to Use the Parts List
5.1.2 Precautions
5.1.3 Plate Composition
5.1.4 Terminology and Symbols
5.1.5 Using Parts Navigation
5.2 Parts List
1. IIT,UI
PL 1.1 IIT Cover
PL 1.2 IIT Bottom-Bracket
PL 1.3 IIT-Platen Glass,APS Sensor
PL 1.4 IIT-Electrical
PL 1.5 IIT-Carriage
PL 1.6 Full Rate Carriage
PL 1.7 Half Rate Carriage
PL 1.8 Top Front Cover Assembly
PL 1.9 Control Panel Component
PL 1.10 S104 Control Panel
PL 1.11 S104 Front Panel
PL 1.12 S104 Display Panel
2. ROS
PL 2.1 ROS
3. Drive
PL 3.1 Drive Unit (1 of 2)
PL 3.2 Drive Unit (2 of 2)
PL 3.3 Fusing Unit Drive Assembly
PL 3.4 Main Drive Assembly
PL 3.5 DEVE Drive Assembly (K)
PL 3.6 DEVE Drive Assembly (Y, M, C)
4. NOHAD
PL 4.1 Air System (1 of 3)
PL 4.2 Air System (2 of 3)
PL 4.3 Air System (3 of 3)
6. XFER
PL 6.1 IBT Unit (1 of 2)
PL 6.2 IBT Unit (2 of 2)
PL 6.3 IBT Belt Unit
PL 6.4 IBT Frame Assembly (1 of 4)
PL 6.5 IBT Frame Assembly (2 of 4)
PL 6.6 IBT Frame Assembly (3 of 4)
PL 6.7 IBT Frame Assembly (4 of 4)
PL 6.8 2ND BTR Roll Assembly (1 of 2)
PL 6.9 2ND BTR Roll Assembly (2 of 2)
PL 6.10 IBT Drawer
7. Fusing Unit, Decurler
PL 7.1 Fusing Unit,Decurler Transport Assembly
PL 7.2 Decurler Transport Assembly
PL 7.3 Lower Transport Assembly (1 of 2)
PL 7.4 Lower Transport Assembly (2 of 2)
PL 7.5 Fusing Unit
PL 7.6 Upper Frame Assembly
PL 7.7 Lower Frame Assembly
8. XERO,DEVE
PL 8.1 Drum/Toner Cartridge
PL 8.2 Dispenser Unit
PL 8.3 Dispenser Assembly (Y,M,C,K)
PL 8.4 Dispenser Assembly
PL 8.5 Erase Lamp,Waste Bottle
PL 8.6 Developer Housing,Xero/Deve Drawer
PL 8.7 Xero/Deve Drawer Component
PL 8.8 Rear Frame (1 of 2)
PL 8.9 Rear Frame (2 of 2)
PL 8.10 Collector Pipe Assembly
PL 8.11 Stand Funnel/Elbow Pipe Assembly
11. Tray Module
PL 11.1 Tray Assembly,Tray Feeder
PL 11.2 Left Hand Cover, Chute
PL 11.3 Take Away Roll, Vertical Transport Roll
PL 11.4 Take Away Motor Assembly, Wire Harness, Caster
PL 11.5 Tray 1/2/3 Assembly (1 of 2)
PL 11.6 Tray 1/2/3 Assembly (2 of 2)
PL 11.7 Tray Feeder Assembly
PL 11.8 Tray Upper Feeder Assembly
PL 11.9 Tray Lower Feeder Assembly
PL 11.10 Feed/Nudger Shaft Assembly
PL 11.11 Left Hand Cover Assembly
PL 11.12 Takeaway Motor Assembly
13. MSI
PL 13.1 MSI Assembly
PL 13.2 MSI Cover
PL 13.3 MSI Component
PL 13.4 MSI Lift Up Motor Component
PL 13.5 MSI Tray Component
PL 13.6 MSI Feeder Component
PL 13.7 MSI Upper Feeder Component
PL 13.8 MSI Lower Feeder Component
PL 13.9 Feed/Nudger Shaft Component
14. Drawer (REGI,DUP,V-TRA,Decurler Drive)
PL 14.1 Drawer Unit
PL 14.2 Drawer Assembly
PL 14.3 Drawer Connection (Rear)
PL 14.4 Drawer Assembly (1 of 4)
PL 14.5 Drawer Assembly (2 of 4)
PL 14.6 Drawer Assembly (3 of 4)
PL 14.7 Drawer Assembly (4 of 4)
PL 14.8 V-Transport Assembly
PL 14.9 Decurler/Inverter Drive Assembly
15. Registration
PL 15.1 Registration Unit
PL 15.2 Registration Transport Assembly (1 of 3)
PL 15.3 Registration Transport Assembly (2 of 3)
PL 15.4 Registration Transport Assembly (3 of 3)
PL 15.5 Registration Drive Assembly
PL 15.6 Transport Chute Assembly and MSI Chute Assembly
PL 15.7 Upper Chute Assembly
16. Inverter
PL 16.1 Inverter Unit
PL 16.2 Inverter Transport Assembly
PL 16.3 Swing Transport Assembly
PL 16.4 Fix Transport Assembly (1 of 2)
PL 16.5 Fix Transport Assembly (2 of 2)
17. Exit/OCT
PL 17.1 Exit
PL 17.2 Exit/Inverter Drive Assembly
PL 17.3 OCT (Color C75 Press Option) (1 of 2)
PL 17.4 OCT (Color C75 Press Option) (2 of 2)
PL 17.5 Exit Fan Assembly (Color C75 Press Option)
18. Electrical
PL 18.1 IOT PWB Chassis Unit
PL 18.2 IOT PWB Chassis Assembly
PL 18.3 IOT-Front/Left
PL 18.4 IOT Rear (1 of 2)
PL 18.5 IOT Rear (2 of 2)
PL 18.6 Wire Harness
19. Cover
PL 19.1 Cover (1 of 2)
PL 19.2 Cover (2 of 2)
35. ESS
PL 35.1 Control Unit
PL 35.2 Control Unit Component
PL 35.3 Control Unit (Option)
37. I/F Module(Color C75 Press)
PL 37.1 IFM Cover
PL 37.2 LVPS / Breaker
PL 37.3 IFM Drive
PL 37.4 Trans Roll
PL 37.5 Decurler Drive Belt
PL 37.6 Inlet Chute
PL 37.7 Gate Assembly
PL 37.8 Guide Assembly
PL 37.9 Guide Assembly Low-563
PL 37.10 Guide Assembly-MID Low
PL 37.11 Guide Assembly-Exit Up
PL 37.12 Fan
38. I/F Cooling Module(Color J75 Press)
PL 38.1 ICM Cover
PL 38.2 LVPS / Breaker
PL 38.3 ICM Drive
PL 38.4 Trans Roll
PL 38.5 Decurler Drive Belt
PL 38.6 Inlet Chute
PL 38.7 Gate Assembly
PL 38.8 Guide Assembly
PL 38.9 Guide Assembly Low-AMIATA
PL 38.10 Guide Assembly-MID Low
PL 38.11 Guide Assembly-Exit Up
PL 38.12 Fan
PL 38.13 Guide Assembly-ILS
39. HCS
PL 39.1 Left / Rear Cover
PL 39.2 Top / Front / Right Cover
PL 39.3 Front Door Component
PL 39.4 Upper / Transport Inner Cover
PL 39.5 HCS Transport Motor 1, HCS Entrance / Top Tray Roll
PL 39.6 Transport / Top Tray Clutch
PL 39.7 HCS Transport Motor 2 , Bypass Roll 1 / 2
PL 39.8 Bypass Clutch 1 / 2
PL 39.9 Top Tray Motor , Top Tray Exit Roll
PL 39.10 Bypass Roll 3 , 2a Gear Box
PL 39.11 Bypass Roll 4 , 3a Gear Box
PL 39.12 Bypass Clutch 3
PL 39.13 Bypass Roll 5 / 6 , Bypass Exit Roll
PL 39.14 HCS Entrance Chute
PL 39.15 1b Chute Assembly
PL 39.16 1b Chute Component
PL 39.17 2b Chute Assembly , Top Tray Exit Lower Chute
PL 39.18 2b Chute Component
PL 39.19 Bypass Upper / Lower Chute 1 , 2b Chute
PL 39.20 Bypass Upper / Lower Chute 2 , Bypass Upper Chute 3
PL 39.21 3b Chute Assembly , Bypass Lower Chute 3 , Bypass Exit Upper Chute
PL 39.22 3b Chute Component
PL 39.23 Gate Solenoid
PL 39.24 Paddle
PL 39.25 Stacker Exit Roll Housing and Edge Sensor Frame
PL 39.26 Stacker Exit Roll Housing Component
PL 39.27 Edge Sensor Frame Component
PL 39.28 Tamper Unit
PL 39.29 Front Tamper Motor
PL 39.30 Side Tamper Extension Motor , Pad Move Motor
PL 39.31 Extension Pad
PL 39.32 Set Clamp Motor , Lead Tamper Motor
PL 39.33 Rear Tamper Motor
PL 39.34 Stacker-Left
PL 39.35 Stacker-Right
PL 39.36 Stacker-Rear
PL 39.37 Stacker Frame Rear-Electrical
PL 39.38 Stacker Elevator-Rear
PL 39.39 Stacker Elevator-Left
PL 39.40 Stacker Elevator-Right
PL 39.41 Dolly
PL 39.42 HCS Control Panel
54. DADF-250(Color)
PL 54.1 DADF Assembly
PL 54.2 DADF Cover, CIS
PL 54.3 DADF PWB, Counter Balance
PL 54.4 Document Tray, Tray Motor
PL 54.5 Feeder Upper Chute, Feeder Cover Interlock Switch
PL 54.6 Feed Motor, Feed Clutch
PL 54.7 Pre Regi. Motor, Pre Regi. Roll Chute, Take Away Roll, Baffle Solenoid
PL 54.8 Regi. Motor, Regi. Roll, Lead Regi. Sensor
PL 54.9 Platen Motor, Platen Roll, Out Roll
PL 54.10 Exit1 Motor, Exit1 Roll
PL 54.11 Guide Upper Chute, Guide Chute Assembly, Invert Chute Assembly
PL 54.12 Exit Upper/Lower Chute, Regi. Out Chute, Feeder Lower Chute
PL 54.13 CIS
PL 54.14 Document Tray
PL 54.15 Document Bottom Tray
PL 54.16 Document Upper Tray
PL 54.17 Feeder Upper Chute
PL 54.18 Feeder/Nudger Roll
PL 54.19 Left Upper Cover
PL 54.20 Pre Regi. Roll Chute
PL 54.21 Feeder Lower Chute
PL 54.22 Guide Chute Assembly
PL 54.23 Exit Upper Chute
PL 54.24 Exit Lower Chute
PL 54.25 Regi. Out Chute
98. Screws
98.1 Screws
99. Adjustment/Consumables Area Code List
99.1 Paper
99.2 Consumables
99.3 Electrical Adjustment
99.4 Mechanical Adjustment
99.5 Originals
99.6 Accessories Related
99.7 Applications/Environment
99.8 DMP/Network Functions Related
5.3 Parts Navigation
Navi 1.1 Processor + Option
Navi 2.1 Processor (1 of 3)
Navi 2.2 Processor (2 of 3)
Navi 2.3 Processor (3 of 3)
Navi 2.4 IIT,UI
Navi 2.5 Tray Module
Navi 2.6 I/F Module
Navi 2.7 HCS
Navi 2.8 I/F Cooling Module
Navi 3.1 HCS Upper
Navi 3.2 HCS Lower

6) GENERAL
6.1 Specifications
6.1.1 Product Name/FWSS Code/XJ Code/Product Code
6.1.3 Software Keys
6.1.4 Machine Size
6.1.5 Machine Weight
6.1.6 Installation Space
6.1.7 Electrical Specification
6.1.8 Noise
6.1.9 Installation Environment
6.1.10 Warm Up Time
6.1.11 First Print Output Time (FPOT)
6.1.12 FCOT (First Copy Output Time)
6.1.13 Copy Speed
6.1.14 Paper Tray and Capacity
6.1.15 Paper Size and Loading Orientation
6.1.16 Tray Paper Size Factory Settings
6.1.17 MSI
6.1.18 Paper Type Mode (Paper Quality Control)
6.1.19 Image Loss
6.1.20 Alignment
6.2 Tools/Service Consumables/Consumables/Modification
6.2.1 Tools/Service Consumables
6.2.1.1 Tools
6.2.1.2 Service Consumables
6.2.2 Consumables
6.2.3 Modification
6.2.4 Modification List
6.3.1 DC330 Input Component Check List
6.3.1.1 DC330 Input Component Check List (DADF-250 Color)
6.3.1.2 DC330 Input Component Check List (IISS)
6.3.1.3 DC330 Input Component Check List (IOT)
6.3.1.4 DC330 Input Component Check List (IF Module)
6.3.1.5 DC330 Input Component Check List (HCS 1)
6.3.2 DC330 Output Component Check List
6.3.2.1 DC330 Output Component Check List (DADF-250 Color)
6.3.2.2 DC330 Output Component Check List (IISS)
6.3.2.3 DC330 Output Component Check List (IOT)
6.3.2.4 DC330 Output Component Check List (IF Module)
6.3.2.5 DC330 Output Component Check List (HCS 1)
6.3.3 DC140 Analog Monitor
6.3.3 DC140 Analog Monitor
6.3.4 DC135 HFSI Counters
6.3.4.1 DC135 HFSI Counters (IOT)
6.3.4.2 DC135 HFSI Counters (DADF-250 Color)
6.3.4.3 DC135 HFSI Counters (IISS)
6.3.4.4 DC135 HFSI Counters (IF Module)
6.3.4.5 DC135 HFSI Counters (HCS 1)
6.3.5 DC612 Print Test Pattern
6.3.5.1 DC612 Print Test Pattern
6.3.5.2 Image Information Flow (Overall
6.3.6 NVM 700,701,702 Cont-Common List
6.3.6 NVM 700, 701, 702 Cont-Common List
6.3.7 NVM 709 Cont-Recycling Record List
6.3.7 NVM 709 Cont-Recycling Record List
6.3.8 NVM 710 IISS (DADF) LIST
6.3.8 NVM 710 IISS (DADF) LIST
6.3.9 NVM711 DAD�e-250 (Color) List
6.3.9 NVM 711 DADF-250 (Color) List
6.3.10 NVM 715 IISS LIST
6.3.10 NVM 715 IISS LIST
6.3.11 NVM716 IISS Extension LIST
6.3.11 NVM 716 IISS Extension LIST
6.3.12 NVM717 IISS-Yata List
6.3.12 NVM 717 IISS-Yata List
6.3.13 NVM 720 Cont-Meter List
6.3.13 NVM 720 Cont-Meter List
6.3.14 NVM 730 Cont-Mastor List
6.3.14 NVM 730 Cont-Master List
6.3.15 NVM740 IOT Manager List
6.3.15 NVM 740 IOT Manager List
6.3.16 NVM741 Drive/MQ/NOHAD List
6.3.16 NVM 741 Drive/MQ/NOHAD List
6.3.17 NVM742,743 Paper Handling List
6.3.17 NVM 742, 743 Paper Handling List
6.3.18 NVM744,745,765,997 Fusing Unit List
6.3.18 NVM 744, 745, 765, 997 Fusing Unit List
6.3.19 NVM746,747,987 X far List
6.3.19 NVM 746, 747, 987 X’fer List
6.3.20 NVM749 ROS List
6.3.20 NVM 749 ROS List
6.3.21 NVM750,751 Xero/Clean List
6.3.21 NVM 750, 751 Xero/Clean List
6.3.22 NVM752~756 Process Control List
6.3.22 NVM 752 to 756 Process Control List
6.3.23 NVM759,760 Registration Control List
6.3.23 NVM 759, 760 Registration Control List
6.3.24 NVM761,762 Deve List
6.3.24 NVM 761, 762 Deve List
6.3.25 NVM764 Output Control List
6.3.25 NVM 764 Output Control List
6.3.26 NVM769 IFM/ICM List
6.3.26 NVM 769 IFM/ICM List
6.3.27 NVM 770,771 Cont-In/Out Port Protocol List
6.3.27 NVM 770, 771 Cont-In/Out Port Protocol List
6.3.28 NVM 780 Cont-IOTsc List
6.3.28 NVM 780 Cont-IOTsc List
6.3.29 NVM 785 Cont-IITsc List
6.3.29 NVM 785 Cont-IITsc List
6.3.30 NVM 790,791 Cont-UI List
6.3.30 NVM 790, 791 Cont-UI List
6.3.31 NVM 800,803,809 Cont-Print Service List
6.3.31 NVM 800, 803, 809 Cont-Print Service List
6.3.32 NVM 810 Cont-Copy Service List
6.3.32 NVM 810 Cont-Copy Service List
6.3.33 NVM 820 Cont-FAX Service List
6.3.33 NVM 820 Cont-Fax Service List
6.3.34 NVM 830 Cont- Internet FAX Service List
6.3.34 NVM 830 Cont-Internet Fax Service List
6.3.35 NVM 840,848 Cont-Scan Service List
6.3.35 NVM 840, 848 Cont-Scan Service List
6.3.36 NVM 850 Cont-EP-SV Service List
6.3.36 NVM 850 Cont-EP-SV Service List
6.3.37 NVM 855~859 Cont-EP-SV/BOX Service List
6.3.37 NVM 855 to 859 Cont-EP-SV/BOX Service List
6.3.38 NVM 870,880,900,910,920 Cont-Diag/Web-EP Service List
6.3.38 NVM 870, 880, 900, 910, 920 Cont-Diag/Web-EP Service List
6.3.39 NVM991 HCS1 List
6.3.39 NVM 991 HCS 1 List
6.4 Service Mode
6.4.1 How to Use the Service Mode
6.4.1.1 UI Diag Screen Structure
6.4.1.2 How to Enter the CE Mode
6.4.1.3 How to Exit from the CE Mode
6.4.1.4 Printing Various Reports
6.4.1.5 Main Reports
6.4.1.6 NVM Settings Recovery Tool
6.4.1.7 AST (Analysis Support Tool)
6.4.2 How to Use the DC Codes
6.4.2.1 EP-BB Registration (EP Service)
6.4.2.2 DC003 Preliminary Diagnostics Request (EP: FX Only)
6.4.2.3 DC004 Used Parts Collection Request (EP: FX only)
6.4.2.4 DC118 Jam Counter (Faults)
6.4.2.5 DC120 Failure Counter (Faults)
6.4.2.6 DC122 Shutdown History (Faults)
6.4.2.7 DC126 System Registration Adjustment (Registration)
6.4.2.8 DC127 Register Paper Feeding Positions (Registration)
6.4.2.9 DC128 Finisher – Adjust Fold Position (Adjustment / Others)
6.4.2.9.1 DC128 Fold Position Printout (Adjustment / Others/Finisher – Adjust Fold Position)
6.4.2.9.2 DC128 Single Fold (Adjustment / Others/Finisher – Adjust Fold Position)
6.4.2.9.3 DC128 Create Booklet – Fold & Staple (Adjustment / Others/Finisher – Adjust Fold Position)
6.4.2.9.4 DC128 Create Booklet – Fold Only (Adjustment / Others/Finisher – Adjust Fold Position)
6.4.2.9.5 DC128 Z Fold Half Sheet (Adjustment / Others/Finisher – Adjust Fold Position)
6.4.2.9.6 DC128 Z Fold (Adjustment / Others/Finisher – Adjust Fold Position)
6.4.2.9.7 DC128 C Fold (Adjustment / Others/Finisher – Adjust Fold Position)
6.4.2.10 DC131 NVM Read / Write (System Data)
6.4.2.11 DC132 Machine ID / Billing Data (Adjustment / Others)
6.4.2.12 DC135 HFSI Counter (Adjustment / Others)
6.4.2.13 DC140 Analog Monitor (IO Check)
6.4.2.14 Software Options
6.4.2.15 Delete All Data
6.4.2.16 DC301 Initialize NVM
6.4.2.17 DC330 Component Control (IO Check)
6.4.2.18 DC355 Hard Disk Failure Prediction Test (Sub System)
6.4.2.19 DC355 Initialize Hard Disk
6.4.2.20 DC362 Restore NVM Values
6.4.2.21 DC527 ADF Independent Operation (Sub System)
6.4.2.22 DC612 Print Test Pattern
6.4.2.23 DC671 Registration Measuring Cycle (Registration)
6.4.2.24 DC673 Registration Control Sensor Check Cycle (Registration)
6.4.2.25 DC675 Registration Control Setup Cycle (Registration)
6.4.2.26 DC726 Measure Paper Path Timing (Registration)
6.4.2.27 DC740 Tray 5 Guide Adjustment (Registration)
6.4.2.28 DC750 IOT CIS Setup Cycle (MAX Setup)
6.4.2.29 DC751 IOT CIS Check Cycle (MAX Setup)
6.4.2.30 DC919 Color Balance Adjustment (MAX Setup)
6.4.2.31 DC924 TRC Adjustment (MAX Setup)
6.4.2.32 DC931 In/Out Manual Setup (MAX Setup)
6.4.2.33 DC938 Procon On / Off Print (MAX Setup)
6.4.2.34 DC945 IIT Calibration (MAX Setup)
6.4.2.34.1 DC945 White Reference Adjustment (MAX Setup/IIT Calibration)
6.4.2.34.2 DC945 CCD Calibration (MAX Setup/IIT Calibration)
6.4.2.34.3 DC945 Optical Axis Correction (MAX Setup/IIT Calibration)
6.4.2.34.4 DC945 Side 2 Shading Correction (MAX Setup/IIT Calibration)
6.4.2.34.5 DC945 White Reference Adjustment – Side 2 (MAX Setup/IIT Calibration)
6.4.2.34.6 DC945 CCD Calibration – Side 2 (MAX Setup/IIT Calibration)
6.4.2.35 DC950 ATC Sensor Setup (MAX Setup)
6.4.2.36 DC956 Belt Edge Learn (Sub System)
6.4.2.37 DC991 Adjust Toner Density (MAX Setup)
6.4.2.38 Back Up Files / Restore Files
6.4.2.39 Delete All Certificates / Initialize Settings
6.4.2.40 Power on Self Test (Common KO/CE Function)
6.4.2.41 Software Upgrade (Device UI Method)
6.4.2.42 ESS-related Hardware Diagnostic Function
6.4.2.43 UI (Control Panel) Self Diagnostic Function

7) WIRING DATA
7.1 Plug/Jack Location List
7.1 How to Use the Plug/Jack Location List
7.1.1 Plug/Jack List/Location
7.1.1.1 Plug/Jack List
7.1.1.2 Plug/Jack Positions
7.1.37 I/F Module Plug/Jack List
7.1.37.1 I/F Module Plug/Jack List
7.1.37.2 I/F Module Plug/Jack Positions
7.1.38 I/F Cooling Module Plug/Jack Location List/Positions
7.1.38.1 I/F Cooling Module Plug/Jack Location List/Positions
7.1.38.2 I/F Cooling Module Plug/Jack Positions
7.1.39 HCS Plug/Jack List/Location
7.1.39.1 HCS Plug/Jack List
7.1.39.2 HCS Plug/Jack Positions

8) ACCESSORIES
8.1 Installation of Wing Table (Color C75 Press Only)
8.2 Installation of Smart Card Reader/Smart Card Reader for HID Prox

9) INSTALLATION / REMOVAL
9.1 Installation
9.1.1 Installation of Main Unit
9.1.2 Installation of OCT (Color C75 Press)
9.1.3 Installation of Scan Feature Extension Kit
9.1.4 Installation of Gigabit Ethernet Kit
9.1.5 Installation of USB Expansion Kit
9.1.6 Installation of I/F Module
9.1.6.1 Installation of I/F Module (Color C75 Press)
9.1.6.2 Installation of I/F Cooling Module (Color J75 Press)
9.1.7 Installation of High Capacity Stacker (HCS)
9.1.7.1 Installation of High Capacity Stacker (HCS) (1 of 2)
9.1.7.2 Installation of High Capacity Stacker (HCS) (2 of 2)
9.1.8 Installation of Chute Guide (When Connecting to a Subsequent Device (e.g. a Finisher)
9.1.9 Installation of Stacker Cart (Additional Option)
9.1.10 Installation of Software Option Products
9.2 Removal
9.2 Removal